Greger1990 Posted May 11, 2008 Share Posted May 11, 2008 Hi, i recently tried to burn a disc with ImgBurn but it wouldn't finalize. I'm using Verbatim's to burn and i burn at 2x speed. I have burned 5 discs with the same settings before, i even burned one just before this disc that failed. All of the others have been working perfectly. Here's the log, any help would be awesome. I 17:51:11 ImgBurn Version 2.4.1.0 started! I 17:51:11 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 17:51:11 Total Physical Memory: 1 Link to comment Share on other sites More sharing options...
Cynthia Posted May 11, 2008 Share Posted May 11, 2008 Hi and welcome to the forum, Greger1990! There is a later firmware 1.04 for that writer. http://www.sonynec-optiarc.eu/en/support-s...-nd-series.html When you update it: No disc in the tray Tray closed All other programs closed Link to comment Share on other sites More sharing options...
Greger1990 Posted May 11, 2008 Author Share Posted May 11, 2008 Thanks Cynthia! Okay I'll try to update my firmwave then. But why did this disc fail when the others did not? That's what i was hoping to get an answer to, and after updating, should i change something or just try again? Link to comment Share on other sites More sharing options...
Cynthia Posted May 11, 2008 Share Posted May 11, 2008 I 17:51:31 Write Speed: 2x If possible, set it 2.4x Just restart the computer before the next try. Link to comment Share on other sites More sharing options...
Greger1990 Posted May 11, 2008 Author Share Posted May 11, 2008 Ok I'll do that. Thanks alot! Link to comment Share on other sites More sharing options...
Recommended Posts