quaestor Posted May 18, 2008 Posted May 18, 2008 ImgBurn 2.4.1.0 Verbatim DVD-R 16x (MCC 03RG20) Perfectly good LG burner Like a moron, I burned a couple year's worth of photos (~900 MB) using UDF 2.01 only (don't ask; I don't know). The burn completed with no errors and verified with no errors. I am unable to read the disc in any of the umpty-million dvd readers (including the burner that created the d*mn thing) in the house, using XP and several flavors of Linux. I've tried the Roxio UDF reader, the Nero UDF reader, and ISOBuster - zippo Oh, yes, and ImgBurn now says that the disc is a blank DVD-R with ~4G free and displays the following: Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,495,103 Last Physical Sector in Layer 0: 0 ~help~ #39;(
mmalves Posted May 18, 2008 Posted May 18, 2008 Try using ImgBurn's Read mode to make an ISO image from that disc. Set the Data Read Speed to 1x before clicking the Read button.
quaestor Posted May 18, 2008 Author Posted May 18, 2008 Try using ImgBurn's Read mode to make an ISO image from that disc. Set the Data Read Speed to 1x before clicking the Read button. Unfortunately, the "go" button never lights up; IB thinks the disc is blank. Or maybe I'm being brain-dead again and there's some option I'm missing...
quaestor Posted May 18, 2008 Author Posted May 18, 2008 Does the disc actually look burnt? OK, er, um, well, NO. Just for future reference; wtf did I do wrong? IB acted like it had burned and verified the disc...
LIGHTNING UK! Posted May 18, 2008 Posted May 18, 2008 Maybe you had 'Test Mode' enabled... but in that case it wouldn't have verified anything. Test mode doesn't burn anything to the disc, the drive doesn't set up the laser to full power and so nothing gets burnt. (This is a drive function btw)
quaestor Posted May 18, 2008 Author Posted May 18, 2008 Maybe you had 'Test Mode' enabled... but in that case it wouldn't have verified anything. Test mode doesn't burn anything to the disc, the drive doesn't set up the laser to full power and so nothing gets burnt. (This is a drive function btw) Nah, test mode defeinitely wasn't enabled... Please don't get the impression I'm trying to blame IB; I'm just trying to figure out what I did wrong ('cause I'm pretty sure it was me )
LIGHTNING UK! Posted May 18, 2008 Posted May 18, 2008 If there's nothing visibly burnt on the disc and test mode wasn't enabled, I wouldn't be blaming yourself, I'd be blaming the drive.
Recommended Posts