ImgBurn may have compatibility issue with Windows XP SP3

[kraml]

I'm running the latest v2.4.1.0 on Windows XP SP3. While before I upgrade to SP3(from SP2), every disc burns fine, but after that, all my discs are now have writing errors when in the write leadin phase. I have tried 4 DVD-R and 1 CD-RW, all the same result.

 

So, can anyone confirm if this is related to XP SP3?

[cornholio7]

we have 2 computers here running sp3 , no problems here....

could you post the log from your last burn attempt please

[kraml]

Here is the log for a DVD+R:

I 21:59:28 ImgBurn Version 2.4.1.0 started!

I 21:59:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 21:59:28 Total Physical Memory: 2,087,276 KB - Available: 823,992 KB

I 21:59:28 Initialising SPTI...

I 21:59:28 Searching for SCSI / ATAPI devices...

I 21:59:48 Found 1 DVD-ROM and 1 DVD

[dontasciime]

Look for a firmware update for your drive. From google I could find there is a 1.08 firmware but only you know whether your using a dell computer lenovo laptop etc. So see manufacturer of your machine for a firmware update or LG if your drive is not OEM etc.

[alan1476]

Look for a firmware update for your drive. From google I could find there is a 1.08 firmware but only you know whether your using a dell computer lenovo laptop etc. So see manufacturer of your machine for a firmware update or LG if your drive is not OEM etc.

Try turniong down your write speed a little, I see you have it set at Max, sometime the media cannot sustain these speeds. I am running SP3 with no issues at all.

[Nayhova]

I am also having the same issue. Before installing SP3 I didnt have one issue with buring a single disk but since installing it I have made 4 coasters. Any help is appreciated. Thanks

[Cynthia]

Hi and welcome to the forum, Nayhova!

 

Could you post a log from one of the failed burns? You'll find it here:

 

Main Menu -> Help -> ImgBurn Logs