sakamoto Posted June 11, 2008 Posted June 11, 2008 (edited) i burned today my first DL. ive used Verbatim 8x DVD+R DL discs. however the burn process did not finalise at the end. does someone have any suggestions why this happened and how i can solve this? i do not want to re-try this a lot as these discs are quiet expensive... thanks in advance! see my burn log below I 00:00:45 ImgBurn Version 2.4.1.0 started!I 00:00:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)I 00:00:45 Total Physical Memory: 458,224 KB - Available: 186,824 KBI 00:00:45 Initialising SPTI...I 00:00:45 Searching for SCSI / ATAPI devices...I 00:00:45 Found 1 DVD-ROM and 1 DVD Edited June 11, 2008 by sakamoto
Cynthia Posted June 11, 2008 Posted June 11, 2008 Hi and welcome to the forum, sakamoto! There is a later firmware version that might work better with that brand of media. If it's an original NEC then here it is http://www.sonynec-optiarc.eu/en/support-s...-nd-series.html If you flash/update it: No disc in the writer Tray closed All other programs closed
sakamoto Posted June 12, 2008 Author Posted June 12, 2008 Cynthia Many thanks! The fw update fixed my issue. Your help was really appreciated! You are faster than light ;-)
Recommended Posts