jake1970 Posted June 26, 2008 Share Posted June 26, 2008 hi i hope someone can help me ive been using img burn for a while with no problems at all with 360 backups and before that i used dvd decryter also with no problems but since a recent update i keep getting errors the first error is cant lock drive which i can ignore and carry on but the next during half way through burn is io error device:[1:0:0] ill attach pic of error(you will probally need to zoom in to read error) if poss i really need to get to bottom of this as im wasting loads of dual layer discs so someone please help many thanks error.bmp Link to comment Share on other sites More sharing options...
volvofl10 Posted June 26, 2008 Share Posted June 26, 2008 post a log file from one of those burns, it gives us more info to work with than the error message. chances are its the actual discs you are using but the log will determinethe problem Link to comment Share on other sites More sharing options...
jake1970 Posted June 26, 2008 Author Share Posted June 26, 2008 ok thanks ,this may sound a stupid question but where do i find the error log? Link to comment Share on other sites More sharing options...
mmalves Posted June 26, 2008 Share Posted June 26, 2008 It's in Help->ImgBurn Logs Link to comment Share on other sites More sharing options...
jake1970 Posted June 26, 2008 Author Share Posted June 26, 2008 here is log hope it helps i just tried burning disk again and same errors and another disk wasted ,never had these problems with disks before ,also tried to burn on friends laptop and burnt fine with disks PiData Ritek Printable Double-Layer 8x DVD+R ImgBurn.log Link to comment Share on other sites More sharing options...
volvofl10 Posted June 26, 2008 Share Posted June 26, 2008 its most likely your discs I 16:24:08 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) get verbatim 2.4x made in singapore with the ID of MKM-001 ( dont get the ones made in india) you can try setting write speed to 4x with the discs you have left ( you have them set at 1x which isnt a recognised speed with those discs on your burner, or 4 x, which is the slowest write speed for those discs on your burner) go to the manufacturers web sit and see if theres a newer firmware for that drive as well Link to comment Share on other sites More sharing options...
mmalves Posted June 26, 2008 Share Posted June 26, 2008 I 16:24:08 Destination Device: [1:0:0] ATAPI DVD A DH20A3P XP5Z (E:) (ATA)I 16:24:08 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) Upgrade your burner's firmware to the latest version available (XY13) and try again. Link to comment Share on other sites More sharing options...
jake1970 Posted June 26, 2008 Author Share Posted June 26, 2008 thanks ill try but ive done over 40 back ups using these disks with dvd decrypter and to start off img burn and had no problems but i will try speed of burning etc cheers Link to comment Share on other sites More sharing options...
spinningwheel Posted June 27, 2008 Share Posted June 27, 2008 thanks ill try but ive done over 40 back ups using these disks Jake...Jake...Jake...40 backups already and you know it's not your discs because you've had no problems with them. That's excellent... Your choice of media was great...at one time...and that time is not now. Ritek has allowed their q/c or something to go out of whack and they are no longer the media that we recommend here. We do hundreds of media tests here...to your 40.. and have only managed to come up with the two mids that we recommend...but...go ahead...stick with yours, but please do let us know how you get on. Link to comment Share on other sites More sharing options...
Recommended Posts