orbitalfunk Posted June 30, 2008 Share Posted June 30, 2008 Ok. Basically I'm loading an image file to burn to +R DL (Hewlett Packard dvd+r) and ImgBurn keeps displaying these error messages at the bottom. (Logical Unit is in process of becoming ready) - for a few seconds before translating into (Medium not present) After some searching I came across this site along with the fact it could well be incorrect media... But here's the cookie. I've used this media before on the same image... It worked just fine, so I can't quite see what the problem is, the drive itself (NEC 3500AG) hasn't been used a great deal so that should be fine too. Any other possibles? Link to comment Share on other sites More sharing options...
orbitalfunk Posted June 30, 2008 Author Share Posted June 30, 2008 (edited) Ok that was very strange.. Thought I'd check the other disks in the spindle. 1 by 1 they kept showing the same error. After accumilating a pile of 5 disks that prompted the described error, I put one in and it's working.... Very strange. Edited June 30, 2008 by orbitalfunk Link to comment Share on other sites More sharing options...
drslump Posted August 10, 2008 Share Posted August 10, 2008 Ok that was very strange.. Thought I'd check the other disks in the spindle. 1 by 1 they kept showing the same error. After accumilating a pile of 5 disks that prompted the described error, I put one in and it's working.... Very strange. Esto mismo me sucede a mi, tengo verbatim dvd-r y me sale el mismo error This itself happens to me to my, I have verbatim dvd-r and the same mistake goes out for me Link to comment Share on other sites More sharing options...
volvofl10 Posted August 10, 2008 Share Posted August 10, 2008 inconsistant quality media is your problem, you need to find something with better quality control taiyo yuden ect ect Link to comment Share on other sites More sharing options...
Recommended Posts