Foodman Posted June 30, 2008 Posted June 30, 2008 Hello, i was trying to burn some back-ups of some xbox360 games. I have the *.iso & *.dvd files. I read a lot of the tutorials on this an other boards, chose 2,4x for write speed (said 2,4x on the dvds). Set the book mode to DVD+R Did not need to set layer break because of the *.dvd file...? I selected the "DVD+R DL Media EEPROM!" under "Lite-On", is this a mistake if i dont have a Lite-On dvd burner? My dvd burner is a HL-DT-ST DVDRW GSA-S10N A100 (so it says in ImgBurn anyways ) My computer is a dell xps m1330 and is supposed to have a Dual Layer burner The DVDs are: "Imation - Double Layer, DVD+R DL, 240 min | 8,5 GB | 2.4x", The shop did not have verbatim but these were supposed to be just as good or better, and at least as expensive as verbatim After 32% of burning, i got and error message. I hope someone have suggestions to the problem, and what i probably did wrong, before i start wasting more 7$ blanks Log transcript: I 14:30:54 ImgBurn Version 2.4.1.0 started! I 14:30:54 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 14:30:54 Total Physical Memory: 2.094.516 KB - Available: 1.049.836 KB I 14:30:56 Initialising SPTI... I 14:30:56 Searching for SCSI / ATAPI devices... I 14:30:56 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted June 30, 2008 Posted June 30, 2008 Your drive is an LG one, not LiteOn. ImgBurn handles the booktype stuff automatically so you don't need to worry about it. There's an updated bios here for that drive: http://support.euro.dell.com/support/downl...p;fileid=224422 You already know the rest. Ditch the Riteks and buy Verbatim 2.4x DVD+R DL (MIS - Made in Singapore). If you can't find them in a store, buy online. I very much doubt you'd even end up paying $2 per disc, let alone $7!
log01 Posted June 30, 2008 Posted June 30, 2008 Verbatim 2.4x DVD+R DL (MKM 001) is the best DL that's the fact, i usually buy 50 at once, for reserve
Recommended Posts