debbie24 Posted June 30, 2008 Posted June 30, 2008 I have been trying for a couple of hours jnow to burn a dvd and keep getting the following message: - I 22:03:05 Writing LeadIn... W 22:03:06 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 22:03:06 Retrying (1 of 20)... W 22:03:06 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:06 Retrying (2 of 20)... W 22:03:06 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:06 Retrying (3 of 20)... W 22:03:07 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:07 Retrying (4 of 20)... W 22:03:07 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:07 Retrying (5 of 20)... W 22:03:07 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:07 Retrying (6 of 20)... W 22:03:08 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:08 Retrying (7 of 20)... W 22:03:08 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:08 Retrying (8 of 20)... W 22:03:08 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:08 Retrying (9 of 20)... W 22:03:08 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:08 Retrying (10 of 20)... W 22:03:09 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:09 Retrying (11 of 20)... W 22:03:09 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:09 Retrying (12 of 20)... W 22:03:10 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:10 Retrying (13 of 20)... W 22:03:10 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:10 Retrying (14 of 20)... W 22:03:11 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:11 Retrying (15 of 20)... W 22:03:11 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:11 Retrying (16 of 20)... W 22:03:11 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:11 Retrying (17 of 20)... W 22:03:11 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:11 Retrying (18 of 20)... W 22:03:12 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:12 Retrying (19 of 20)... W 22:03:12 Retry Failed - Reason: Power Calibration Area Is Full W 22:03:12 Retrying (20 of 20)... W 22:03:12 Retry Failed - Reason: Power Calibration Area Is Full E 22:03:14 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full I 22:03:14 Synchronising Cache... W 22:03:18 User opted to skip the 'Close Track/Session/Disc' functions. E 22:03:18 Failed to Write Image! E 22:03:18 Operation Failed! - Duration: 00:00:15 I 22:03:18 Average Write Rate: N/A - Maximum Write Rate: N/A Can someone please tell me what this means and if I can get around it? Thanks Debbie
mmalves Posted June 30, 2008 Posted June 30, 2008 It means the drive wasn't able to burn that disc, and usually that happens due to low quality media. Can you post the whole log of that burn?
debbie24 Posted June 30, 2008 Author Posted June 30, 2008 It means the drive wasn't able to burn that disc, and usually that happens due to low quality media. Can you post the whole log of that burn? I 21:46:07 ImgBurn Version 2.4.1.0 started! I 21:46:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:46:07 Total Physical Memory: 523,564 KB - Available: 252,432 KB W 21:46:07 Drive H:\ (FAT32) does not support single files > 4 GB in size. I 21:46:07 Initialising SPTI... I 21:46:07 Searching for SCSI / ATAPI devices... I 21:46:07 Found 1 DVD
mmalves Posted June 30, 2008 Posted June 30, 2008 I 22:15:56 Operation Started!I 22:15:56 Source File: -==/\/[bUILD IMAGE]\/\==- I 22:15:56 Source File Sectors: 2,137,040 (MODE1/2048) I 22:15:56 Source File Size: 4,376,657,920 bytes I 22:15:56 Source File Volume Identifier: dvd I 22:15:56 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 22:15:56 Source File Implementation Identifier: ImgBurn I 22:15:56 Source File File System(s): ISO9660, UDF (1.02) I 22:15:56 Destination Device: [0:0:0] HP DVD Writer 630c CH01 (I:) (ATA) I 22:15:56 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) That amount of data would fit a common (single-layer) DVD-R/DVD+R just fine. May I ask why are you trying to burn it to dual-layer media? By the way, this dual-layer media you have is low quality so that's why you're getting that error. I tried to find a firmware update for your burner but HP's site thinks I wanted drivers for the HP Deskjet 630 printer
debbie24 Posted June 30, 2008 Author Posted June 30, 2008 I 22:15:56 Operation Started!I 22:15:56 Source File: -==/\/[bUILD IMAGE]\/\==- I 22:15:56 Source File Sectors: 2,137,040 (MODE1/2048) I 22:15:56 Source File Size: 4,376,657,920 bytes I 22:15:56 Source File Volume Identifier: dvd I 22:15:56 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 22:15:56 Source File Implementation Identifier: ImgBurn I 22:15:56 Source File File System(s): ISO9660, UDF (1.02) I 22:15:56 Destination Device: [0:0:0] HP DVD Writer 630c CH01 (I:) (ATA) I 22:15:56 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) That amount of data would fit a common (single-layer) DVD-R/DVD+R just fine. May I ask why are you trying to burn it to dual-layer media? By the way, this dual-layer media you have is low quality so that's why you're getting that error. I tried to find a firmware update for your burner but HP's site thinks I wanted drivers for the HP Deskjet 630 printer When I went to pick up the discs these were the only ones in the shop with 240 minutes on, the rest were only 120 mins. What will I have to do?
cornholio7 Posted June 30, 2008 Posted June 30, 2008 look at the file size (gb) and not the minutes, if it fits onto single layer media , thats all you need to use
debbie24 Posted June 30, 2008 Author Posted June 30, 2008 look at the file size (gb) and not the minutes, if it fits onto single layer media , thats all you need to use Brill its now working as using another one of my blank dvd's. Thanks a lot x
Recommended Posts