bobgatz Posted July 15, 2008 Share Posted July 15, 2008 Hi, I generally use the physical button on the drive to open and close the disc door. When I do that, the first disc burns and verifies OK. If I then load a new iso file and insert a new blank disc and use the drive button to close the door, imgburn sees the drive as becoming ready, and then states it is ready. If I initiate the burn, imgburn starts to reserve the track and then hangs. After about 5 minutes (to verify it indeed is doing nothing), I press the abort button and imgburn acknowledges that, but does not shut down. Windows XP cannot close down imgburn either, even when task manager is invoked to end the application. I have to force a power shutdown by holding the power switch on the computer. This has happened at least 3 times before I decided to use the eject and load buttons in the imgburn display to remove and load new discs. Now I can burn the subsequent discs with no problem. This info may help other users who are using the drive switch. Link to comment Share on other sites More sharing options...
Recommended Posts