LITE SPD Posted July 27, 2008 Posted July 27, 2008 Never burned a disc before but I think this software isn't working. Any ideas? here is the log file: I 07:13:03 ImgBurn Version 2.4.2.0 started! I 07:13:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 07:13:03 Total Physical Memory: 3,404,840 KB - Available: 2,368,568 KB I 07:13:03 Initialising SPTI... I 07:13:03 Searching for SCSI / ATAPI devices... I 07:13:03 Found 1 DVD
mmalves Posted July 27, 2008 Posted July 27, 2008 ImgBurn relies on what your drive tells it, and in that case it seems your drive stopped reading the disc (or is having problems reading that disc) but it didn't tell that to ImgBurn, so ImgBurn keeps waiting for the data. This situation can be caused by several factors: copy protection on the disc (most commercial discs are protected against copying); dirty/scratched disc; communication error between the drive and the motherboard controller, or some software working inbetween these two Make sure you're using the latest storage/chipset drivers available for your motherboard. Also please post your Filter Driver Load Order (it's in the Tools menu).
Recommended Posts