Presveti Posted July 30, 2008 Posted July 30, 2008 (edited) I recently bought Pioneer 215D. I tried on various cd media this function but it never succeeded. Maybe I do it wrong:| 1. I write data 2. when imgburn finish writing than I go to tools->drive->close Here's error: Here's the log of writing: I 18:07:59 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 18:07:59 Source File Implementation Identifier: ImgBurn I 18:07:59 Source File File System(s): ISO9660, UDF (1.02) I 18:07:59 Destination Device: [2:0:0] PIONEER DVD-RW DVR-215D 1.13 (F:) (ATA) I 18:07:59 Destination Media Type: CD-RW (Disc ID: 97m34s23f) (Speeds: 4x, 10x) I 18:07:59 Destination Media Sectors: 359,847 I 18:07:59 Write Mode: CD I 18:07:59 Write Type: SAO I 18:07:59 Write Speed: 2x I 18:07:59 Test Mode: No I 18:07:59 OPC: No I 18:07:59 BURN-Proof: Enabled I 18:07:59 Filling Buffer... (40 MB) I 18:08:00 Writing LeadIn... I 18:08:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 65455) I 18:08:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 65455) I 18:12:21 Synchronising Cache... I 18:13:04 Exporting Graph Data... I 18:13:04 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-215D_1.13_WEDNESDAY-JULY-30-2008_18-07_97m34s23f_2x.ibg I 18:13:04 Export Successfully Completed! I 18:13:04 Operation Successfully Completed! - Duration: 00:05:04 I 18:13:04 Average Write Rate: 606 KB/s (4.0x) - Maximum Write Rate: 615 KB/s (4.1x) I 18:13:04 Cycling Tray before Verify... I 18:13:23 Device Ready! I 18:13:24 Operation Started! I 18:13:24 Source Device: [2:0:0] PIONEER DVD-RW DVR-215D 1.13 (F:) (ATA) I 18:13:24 Source Media Type: CD-RW (Disc ID: 97m34s23f) (Speeds: 4x, 10x) I 18:13:24 Image File: -==/\/[bUILD IMAGE]\/\==- I 18:13:24 Image File Sectors: 65,456 (MODE1/2048) I 18:13:24 Image File Size: 134,053,888 bytes I 18:13:24 Image File Volume Identifier: Dexter I 18:13:24 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 18:13:24 Image File Implementation Identifier: ImgBurn I 18:13:24 Image File File System(s): ISO9660, UDF (1.02) I 18:13:24 Read Speed (Data/Audio): MAX / MAX I 18:13:24 Verifying Session 1 of 1... (1 Track, LBA: 0 - 65455) I 18:13:24 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 65455) I 18:14:21 Exporting Graph Data... I 18:14:21 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-215D_1.13_WEDNESDAY-JULY-30-2008_18-07_97m34s23f_2x.ibg I 18:14:21 Export Successfully Completed! I 18:14:21 Operation Successfully Completed! - Duration: 00:00:56 I 18:14:21 Average Verify Rate: 2,337 KB/s (15.6x) - Maximum Verify Rate: 2,923 KB/s (19.5x) Edited July 30, 2008 by Presveti
dontasciime Posted July 30, 2008 Posted July 30, 2008 You do not need to do that. It's already been done by ImgBurn when you wrote the disc. Also upgrade your firmware in the pioneer 215D http://www.pioneer.co.uk/files/support/DVR...15D_FW118EU.zip
Presveti Posted July 30, 2008 Author Posted July 30, 2008 How do you know it finalized? I read the whole log and didn't saw it? How can I turn that option off? For example if I want to make multisession disk. I heard that updating firmware is vary bad for the rom, is that true? What does it do?
dontasciime Posted July 30, 2008 Posted July 30, 2008 I 18:13:04 Operation Successfully Completed! - Duration: 00:05:04 & I 18:14:21 Operation Successfully Completed! - Duration: 00:00:56 I 18:14:21 Average Verify Rate: 2,337 KB/s (15.6x) - Maximum Verify Rate: 2,923 KB/s (19.5x) YOU CANNOT make Multisession with ImgBurn, rather you cannot add anything. Pioneer release Firmware for a reason. Do what you want though.
Recommended Posts