a little help

[cbjw]

i keep getting I/O errors

 

I 21:33:40 ImgBurn Version 2.4.2.0 started!

I 21:33:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 21:33:40 Total Physical Memory: 2,030,060 KB - Available: 1,493,960 KB

I 21:33:40 Initialising SPTI...

I 21:33:40 Searching for SCSI / ATAPI devices...

I 21:33:40 Found 1 DVD

[mmalves]

I 21:34:45 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH22NP20 1.00 (D:) (ATA)

I 21:34:45 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 4x, 8x, 12x)

Try burning at 8x or 4x and see if it works. You'll have better results using high quality media such as Verbatim and Taiyo Yuden blanks

[spinningwheel]

i keep getting I/O errors

 

Follow mmalves advice. I/O errors are the result of your firmware/media/drive not playing nicely together. Skip the junk media and get the proper Taiyo Yuden or Verbatim DataLifePlus discs made in Singapore. Make sure your firmware is up to date and maybe clean your lens in the drive.