cbjw Posted August 6, 2008 Share Posted August 6, 2008 i keep getting I/O errors I 21:33:40 ImgBurn Version 2.4.2.0 started! I 21:33:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:33:40 Total Physical Memory: 2,030,060 KB - Available: 1,493,960 KB I 21:33:40 Initialising SPTI... I 21:33:40 Searching for SCSI / ATAPI devices... I 21:33:40 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 6, 2008 Share Posted August 6, 2008 I 21:34:45 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH22NP20 1.00 (D:) (ATA)I 21:34:45 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 4x, 8x, 12x) Try burning at 8x or 4x and see if it works. You'll have better results using high quality media such as Verbatim and Taiyo Yuden blanks Link to comment Share on other sites More sharing options...
spinningwheel Posted August 6, 2008 Share Posted August 6, 2008 i keep getting I/O errors Follow mmalves advice. I/O errors are the result of your firmware/media/drive not playing nicely together. Skip the junk media and get the proper Taiyo Yuden or Verbatim DataLifePlus discs made in Singapore. Make sure your firmware is up to date and maybe clean your lens in the drive. Link to comment Share on other sites More sharing options...
Recommended Posts