canman Posted August 9, 2008 Posted August 9, 2008 i have been using imageburn and making dvd's for a while now , and never had any problems. i recently updated my version of imgburn, and now it does not seem to work properly. i use dvdflick to author the dvd and imgburn to write it, i insert the dvd into the player, and it will work for about 10 min or so then freeze up. i have cleaned both the dvd player and my dvd burner with a store bought cleaner disc, and no luck, i was wondering if there was some setting that i have missed from the old version to the new one, or if my burner might be out of wack if that is possible. i just don't see while it would play for 10 min and then freeze . i still have disks that i burner a year ago and they seem to play all the way through. any suggestions or advice would be appreciated! canman
volvofl10 Posted August 9, 2008 Posted August 9, 2008 sounds like you have differant discs to what you normally use ( differant dye on the discs) ,post a log file so we have something to work with
canman Posted August 9, 2008 Author Posted August 9, 2008 i am using the same discs that i normally use, memorex dvd+r, also the same programs as always here is a snippet fro the log that i tried to burn the other night. the disc plays for about 5-10 min and then freezes I 22:56:36 Operation Started! I 22:56:36 Source File: C:\Documents and Settings\steve\My Documents\Downloads\Good.Luck.Chuck.NTSC.DVD-R.DVDSeeders\Good.Luck.Chuck.NTSC.DVD-R.DVDSeeders.iso I 22:56:36 Source File Sectors: 2,266,520 (MODE1/2048) I 22:56:36 Source File Size: 4,641,832,960 bytes I 22:56:36 Source File Volume Identifier: GOOD_LUCK_CHUCK I 22:56:36 Source File Volume Set Identifier: 487755BB________GOOD_LUCK_CHUCK I 22:56:36 Source File Application Identifier: DVDFAB I 22:56:36 Source File Implementation Identifier: FENGTAO SOFTWARE I 22:56:36 Source File File System(s): ISO9660, UDF (1.02) I 22:56:36 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 22:56:36 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 22:56:36 Destination Media Sectors: 2,295,104 I 22:56:36 Write Mode: DVD I 22:56:36 Write Type: DAO I 22:56:36 Write Speed: MAX I 22:56:36 Link Size: Auto I 22:56:36 Test Mode: No I 22:56:36 OPC: No I 22:56:36 BURN-Proof: Enabled I 22:56:36 Book Type Setting: N/A I 22:57:06 Filling Buffer... (40 MB) I 22:57:08 Writing LeadIn... I 22:57:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 2266519) I 22:57:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2266519) I 23:06:53 Synchronising Cache... I 23:06:54 Closing Track... I 23:06:55 Finalising Disc... I 23:07:32 Exporting Graph Data... I 23:07:33 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_10-56_PM_RICOHJPN-R03-04_MAX.ibg I 23:07:33 Export Successfully Completed! I 23:07:33 Operation Successfully Completed! - Duration: 00:10:53 I 23:07:33 Average Write Rate: 7,788 KB/s (5.6x) - Maximum Write Rate: 11,364 KB/s (8.2x) I 23:09:59 Close Request Acknowledged I 23:09:59 Closing Down... I 23:09:59 Shutting down SPTI... I 23:09:59 ImgBurn closed! I 21:41:45 ImgBurn Version 2.4.1.0 started!
Cynthia Posted August 9, 2008 Posted August 9, 2008 The question might be how good the burn was. I would go and test it by scanning it with Nero DiscSpeed (free). http://www.cdspeed2000.com/ Start the program Select the tab 'Disc Quality' Select 8x as speed Press the button 'Start' Not all writers are good scanners - but it should show you a hint of the quality of the burn.
canman Posted August 9, 2008 Author Posted August 9, 2008 cynthia, i dl the program, and tried to run it , i only have option under setting for 3x or max , also the start button is greyed out , any ideas ??am i missing something here ?? thanks canman
Cynthia Posted August 9, 2008 Posted August 9, 2008 Might be that not all writers are good scanners, so it could be that your writer is disabled due to that fact in that program. You have 'Verify' disabled in ImgBurn, it would be a good thing to enable it for the next writes. Start ImgBurn and go to Write mode and check mark the option 'Verify'. The next time you write something, it should then also perform the verifying stage. If you play your burned disc in your computer, does it also freeze then?
canman Posted August 9, 2008 Author Posted August 9, 2008 cynthia, i found the scan disc option on the nero speed , scanned a disc and it showing me errors and bad sectors at about 65% complete , and yes the discs work fine in my lappy, i had verify turned off cause alot of times i am away when it burns and it ejects the tray, figured it would allow dirt and dust in there. here is a snippet from a disc burned with the verify on , got a error at 67% , clicked on try again and it continued till the end. I 21:42:22 Operation Started! I 21:42:22 Source File: -==/\/[bUILD IMAGE]\/\==- I 21:42:22 Source File Sectors: 2,043,488 (MODE1/2048) I 21:42:22 Source File Size: 4,185,063,424 bytes I 21:42:22 Source File Volume Identifier: DANECOOK2 I 21:42:22 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 21:42:22 Source File Implementation Identifier: ImgBurn I 21:42:22 Source File File System(s): ISO9660, UDF (1.02) I 21:42:22 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 21:42:22 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 21:42:22 Destination Media Sectors: 2,295,104 I 21:42:22 Write Mode: DVD I 21:42:22 Write Type: DAO I 21:42:22 Write Speed: 16x I 21:42:22 Link Size: Auto I 21:42:22 Test Mode: No I 21:42:22 OPC: No I 21:42:22 BURN-Proof: Enabled I 21:42:22 Book Type Setting: N/A I 21:42:53 Filling Buffer... (40 MB) I 21:42:54 Writing LeadIn... I 21:42:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 2043487) I 21:42:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2043487) W 21:46:49 Waiting for buffers to recover... W 21:46:58 Waiting for hard disk activity to reach threshold level... I 21:47:01 Writing Sectors... I 21:52:20 Synchronising Cache... I 21:52:21 Closing Track... I 21:52:22 Finalising Disc... I 21:53:13 Exporting Graph Data... I 21:53:13 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_9-42_PM_RICOHJPN-R03-04_16x.ibg I 21:53:13 Export Successfully Completed! I 21:53:13 Operation Successfully Completed! - Duration: 00:10:51 I 21:53:13 Average Write Rate: 7,272 KB/s (5.3x) - Maximum Write Rate: 10,870 KB/s (7.8x) I 21:53:13 Cycling Tray before Verify... W 21:53:23 Waiting for device to become ready... I 21:53:44 Device Ready! I 21:53:46 Operation Started! I 21:53:46 Source Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 21:53:46 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 21:53:46 Image File: -==/\/[bUILD IMAGE]\/\==- I 21:53:46 Image File Sectors: 2,043,488 (MODE1/2048) I 21:53:46 Image File Size: 4,185,063,424 bytes I 21:53:46 Image File Volume Identifier: DANECOOK2 I 21:53:46 Image File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 21:53:46 Image File Implementation Identifier: ImgBurn I 21:53:46 Image File File System(s): ISO9660, UDF (1.02) I 21:53:46 Read Speed (Data/Audio): MAX / MAX I 21:53:46 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2043487) I 21:53:46 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2043487) W 22:09:31 Failed to Read Sector 1324160 - Reason: Unknown (CRC or ECC Error) (0x10, 0x90) W 22:09:31 Sector 1324160 maps to File: \VIDEO_TS\VTS_01_3.VOB E 22:09:43 Failed to Read Sector 1324161 - Reason: Unknown (CRC or ECC Error) (0x10, 0x90) E 22:09:43 Sector 1324161 maps to File: \VIDEO_TS\VTS_01_3.VOB E 22:09:43 Failed to Verify Sectors! I 22:09:45 Exporting Graph Data... I 22:09:45 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_9-42_PM_RICOHJPN-R03-04_16x.ibg I 22:09:45 Export Successfully Completed! E 22:09:45 Operation Failed! - Duration: 00:15:57 I 22:09:45 Average Verify Rate: 2,767 KB/s (2.0x) - Maximum Verify Rate: 4,568 KB/s (3.3x) I 22:10:31 Close Request Acknowledged I 22:10:31 Closing Down... I 22:10:31 Shutting down SPTI... I 22:10:31 ImgBurn closed!
dontasciime Posted August 9, 2008 Posted August 9, 2008 Enable_CDSpeed_Scanning_32bit.reg try importing and merging this reg file then try with your burner to scan
volvofl10 Posted August 9, 2008 Posted August 9, 2008 you say you updated ImgBurn , but your log shows your still using an older version ,v 2.4.1.0 . current version is v 2.4.2.0 i would'nt say your using the best +R discs in the world either, so i still reckon its a case of your player does not like those discs, especially as they play fine on your laptop . time to look about for something thats compatable with all your players. EDIT , just read back your log files, change the write speed to 8x instead of 16x and MAX in verify tab , change read speed for data/Audio to 4 or 8 instead of Max as well
Cynthia Posted August 9, 2008 Posted August 9, 2008 I 21:53:46 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x)I 21:42:22 Write Speed: 16x Only supported write speed for that combination of media/writer is 4x and 8x. I 21:53:13 Average Write Rate: 7,272 KB/s (5.3x) - Maximum Write Rate: 10,870 KB/s (7.8x) Might try 4x.
volvofl10 Posted August 9, 2008 Posted August 9, 2008 canman are you using the laptop to burn these discs, or another desktop PC ?
canman Posted August 10, 2008 Author Posted August 10, 2008 (edited) yes vovlo i am using my laptop to burn these discs, i am going to town today, will see about getting a few better discs, what brand should i look for, will also try to slow down the write speeds too see if that works thanks canman wierd that they say only 8x supported, says 16x on the disc itself Edited August 10, 2008 by canman
mmalves Posted August 10, 2008 Posted August 10, 2008 wierd that they say only 8x supported, says 16x on the disc itself That's because the burner itself only burns up to 8x The best blanks are made by Verbatim and Taiyo Yuden
canman Posted August 12, 2008 Author Posted August 12, 2008 well folks , i am at a loss here, upgraded to newest version 2.4.2, bought new discs, and tried to burn movie, again it plays fine in the player that burned it , but when i try to play it in dvd player it freezes up after 10 min , also it errors out on the verify , always at 67% , (which i find weird), i was wondering if my burner is getting weak, (is that possible). it is a couple of year old now, or is there settings that i may be missing , from the older version to the newer version. any more ideas or help would be appreciated. thanks canman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now