HORiZUN Posted August 13, 2008 Posted August 13, 2008 ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Wednesday, 13 August 2008, 21:35:05 ; \\****************************************// ; ; I 21:00:03 ImgBurn Version 2.4.2.0 started! I 21:00:03 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 21:00:03 Total Physical Memory: 1,301,808 KB - Available: 859,136 KB I 21:00:03 Initialising SPTI... I 21:00:03 Searching for SCSI / ATAPI devices... W 21:00:03 No devices detected! W 21:00:12 Device Arrival Detected! I 21:00:12 Searching for SCSI / ATAPI devices... I 21:00:13 Found 1 DVD
volvofl10 Posted August 13, 2008 Posted August 13, 2008 I 21:00:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) change media and get verbatim 2.4x with the ID of MKM-001 , the ones made in singapore
aaronjamesjr Posted August 13, 2008 Posted August 13, 2008 I 21:00:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) change media and get verbatim 2.4x with the ID of MKM-001 , the ones made in singapore Hi! my first post. I have the same problem. I wonder if all cheapdiscs are like that. I used another brand and got the same. I wonder if it's my writer here's the log: I 15:54:01 ImgBurn Version 2.4.2.0 started! I 15:54:01 Microsoft Windows Vista Home Basic Edition (6.0, Build 6001 : Service Pack 1) I 15:54:01 Total Physical Memory: 2,086,516 KB - Available: 1,003,628 KB I 15:54:01 Initialising SPTI... I 15:54:01 Searching for SCSI / ATAPI devices... I 15:54:01 Found 1 DVD-ROM and 2 DVD
LOCOENG Posted August 13, 2008 Posted August 13, 2008 I wonder if all cheapdiscs are like that. Yes they are... I 15:57:08 Destination Device: [0:0:0] PIONEER DVR-113NP 1.00 (H:) Current firmware for you drive should be 1.01...check with the manufacturer for an update.
HORiZUN Posted August 16, 2008 Author Posted August 16, 2008 I switched media. Verbatim DVD+R DL Burns fine, as always. I didn't buy those Memorex discs, a friend did. The funny thing is, that Memorex burn fine IF they're the ones from the jewel cases. I can't burn any from a spindle. Weird. Thanks for the help. Thought it was my burner, as it burns SOME Memorex, not all. Lol.
volvofl10 Posted August 16, 2008 Posted August 16, 2008 Its all about which dye the disc is made with Some brands use several differant dye manufacturers on differant products within there brand name, then at a later date, they change the dye on that paticular brand. Thats why we recommend verb 2.4x made in singapore with the ID of MKM-001, they are consistently good compared with any other Dual layer discs we have tried.
Arcolite Posted September 14, 2008 Posted September 14, 2008 Mine has just started giving me the same error(s) yet I'm using Verbatim 2.4x (MKM-001). These have worked in the past but don't now. It's an old pack that haven't been used for a while, could they have gone bad? Here's the log. I clicked "Continue" on the first OPC message. If I disable OPC in the Write options, I still get the second L0 error. I 10:30:20 Operation Started! I 10:30:20 Source File: E:\dvd\complete\swfu\swtfu.dvd I 10:30:20 Source File Sectors: 3,825,924 (MODE1/2048) I 10:30:20 Source File Size: 7,835,492,352 bytes I 10:30:20 Source File Volume Identifier: XGD2DVD_NTSC I 10:30:20 Source File Volume Set Identifier: 34672923 I 10:30:20 Source File Implementation Identifier: Sonic Scenarist 3.1 I 10:30:20 Source File File System(s): ISO9660, UDF (1.02) I 10:30:20 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.29 (F:) (ATA) I 10:30:20 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 10:30:20 Destination Media Sectors: 4,173,824 I 10:30:20 Write Mode: DVD I 10:30:20 Write Type: DAO I 10:30:20 Write Speed: 2.4x I 10:30:20 Link Size: Auto I 10:30:20 Test Mode: No I 10:30:20 OPC: Yes I 10:30:20 BURN-Proof: Enabled W 10:30:29 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error I 10:30:29 Optimal L0 Data Zone Capacity: 1,913,760 I 10:30:29 Optimal L0 Data Zone Method: Copied From Original Disc E 10:30:37 Failed to set L0 Data Zone Capacity! E 10:30:37 Reason: Power Calibration Area Error E 10:30:37 Operation Failed! - Duration: 00:00:16 I 10:30:37 Average Write Rate: N/A - Maximum Write Rate: N/A
Recommended Posts