Riggers Posted August 17, 2008 Posted August 17, 2008 Hello. This is my first posting but I have read through the site & can't seem to find the answer to this problem. Error: Failed to set L0 Data Zone Capacity. I am using Imgburn v 2.4.2.0. Any help would be much appreciated. Log: I 16:48:07 Operation Started! I 16:48:07 Source File: G:\ISO Files\NAV_DB_19918.iso I 16:48:07 Source File Sectors: 2,865,088 (MODE1/2048) I 16:48:07 Source File Size: 5,867,700,224 bytes I 16:48:07 Source File Volume Identifier: NAV_DB_19918 I 16:48:07 Source File File System(s): ISO9660 I 16:48:07 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-841S 1.11 (E:) (ATA) I 16:48:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 16:48:07 Destination Media Sectors: 2,865,088 I 16:48:07 Write Mode: DVD I 16:48:07 Write Type: DAO I 16:48:07 Write Speed: MAX I 16:48:07 Link Size: Auto I 16:48:07 Test Mode: No I 16:48:07 OPC: No I 16:48:07 BURN-Proof: Enabled I 16:48:15 Optimal L0 Data Zone Capacity: 1,432,544 I 16:48:15 Optimal L0 Data Zone Method: ECC Block Boundary E 16:48:23 Failed to set L0 Data Zone Capacity! E 16:48:23 Reason: Invalid Field in CDB E 16:48:23 Operation Failed! - Duration: 00:00:15 I 16:48:23 Average Write Rate: N/A - Maximum Write Rate: N/A
mmalves Posted August 17, 2008 Posted August 17, 2008 I 16:48:07 Source File Sectors: 2,865,088 (MODE1/2048)I 16:48:07 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-841S 1.11 (E:) (ATA) I 16:48:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 16:48:07 Destination Media Sectors: 2,865,088 That disc is the result of a failed burn from another burn attempt and it got damaged in the process, so you'll have to try a new one. But first, contact the laptop manufacturer and check if there's a newer firmware available for your burner. Alternatively you could get a normal-sized burner in an external enclosure, as they're reasonably unexpensive and will make better quality burns
Riggers Posted August 17, 2008 Author Posted August 17, 2008 I 16:48:07 Source File Sectors: 2,865,088 (MODE1/2048)I 16:48:07 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-841S 1.11 (E:) (ATA) I 16:48:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 16:48:07 Destination Media Sectors: 2,865,088 That disc is the result of a failed burn from another burn attempt and it got damaged in the process, so you'll have to try a new one. But first, contact the laptop manufacturer and check if there's a newer firmware available for your burner. Alternatively you could get a normal-sized burner in an external enclosure, as they're reasonably unexpensive and will make better quality burns Thank you for the very prompt reply! Apparently I have the latest firmware for my Vaio but that was from doing an internet search to find out, not by contacting Sony. Changing the disc got the process through that hurdle but it then failed at this point: Failed to set L0 Data Zone Capacity! Any ideas? I 16:47:06 ImgBurn Version 2.4.2.0 started! I 16:47:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 16:47:06 Total Physical Memory: 2,096,432 KB - Available: 1,247,292 KB I 16:47:06 Initialising SPTI... I 16:47:06 Searching for SCSI / ATAPI devices... I 18:41:00 Operation Started! I 18:41:00 Source File: G:\ISO Files\NAV_DB_19918.iso I 18:41:00 Source File Sectors: 2,865,088 (MODE1/2048) I 18:41:00 Source File Size: 5,867,700,224 bytes I 18:41:00 Source File Volume Identifier: NAV_DB_19918 I 18:41:00 Source File File System(s): ISO9660 I 18:41:00 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-841S 1.11 (E:) (ATA) I 18:41:00 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 18:41:00 Destination Media Sectors: 4,173,824 I 18:41:00 Write Mode: DVD I 18:41:01 Write Type: DAO I 18:41:01 Write Speed: MAX I 18:41:01 Link Size: Auto I 18:41:01 Test Mode: No I 18:41:01 OPC: No I 18:41:01 BURN-Proof: Enabled I 18:41:16 Optimal L0 Data Zone Capacity: 1,432,544 I 18:41:16 Optimal L0 Data Zone Method: ECC Block Boundary E 18:41:36 Failed to set L0 Data Zone Capacity! E 18:41:36 Reason: Power Calibration Area Error E 18:41:36 Operation Failed! - Duration: 00:00:35 I 18:41:36 Average Write Rate: N/A - Maximum Write Rate: N/A
mmalves Posted August 17, 2008 Posted August 17, 2008 E 18:41:36 Failed to set L0 Data Zone Capacity!E 18:41:36 Reason: Power Calibration Area Error Well, your burner doesn't like those discs for some reason. Where are your Verbatim DVD+R DLs made? Singapore or India? It's written in the packaging/spindle. Unfortunately only a firmware update could help solving this problem. I guess you'll have to use another computer to burn this or you'll need to buy an external burner.
Riggers Posted August 17, 2008 Author Posted August 17, 2008 E 18:41:36 Failed to set L0 Data Zone Capacity!E 18:41:36 Reason: Power Calibration Area Error Well, your burner doesn't like those discs for some reason. Where are your Verbatim DVD+R DLs made? Singapore or India? It's written in the packaging/spindle. Unfortunately only a firmware update could help solving this problem. I guess you'll have to use another computer to burn this or you'll need to buy an external burner. Made in Singapore ............. which is rather annoying. I'll try contacting Sony tomorrow to see if there is another firmware update I have missed during my searches. Thank you for your help, it really is very much appreciated!
Recommended Posts