I/O problems

[shiny]

i have problems with the I/O alot when i try and burn backups

sometimes during the burning and sometimes while finalizing

 

for the finalizing :

 

I 18:55:02 Finalising Disc...

W 18:56:45 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 18:56:45 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

W 18:56:45 Retrying (1 of 3)...

W 18:58:28 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 18:58:28 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 18:58:28 Retrying (2 of 3)...

W 19:00:09 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 19:00:09 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 19:00:09 Retrying (3 of 3)...

W 19:01:55 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 19:01:55 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 19:05:12 Retrying (4)...

W 19:06:50 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 19:06:50 Retry Failed - Reason: Session Fixation Error Writing Lead Out

I 19:06:56 Finalising Disc (Last Attempt!)...

E 19:10:11 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

E 19:10:11 Failed to Write Image!

I 19:10:12 Exporting Graph Data...

I 19:10:12 Graph Data File: C:\Documents and Settings\Sir-System\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-W162C_TS07_DINSDAG-29-JULI-2008_18-15_CMC_MAG-D03-64_1x.ibg

I 19:10:12 Export Successfully Completed!

E 19:10:12 Operation Failed! - Duration: 00:55:00

I 19:10:12 Average Write Rate: 3.326 KB/s (2.4x) - Maximum Write Rate: 3.413 KB/s (2.5x)

 

 

screenshot of the error :

http://img.photobucket.com/albums/v322/MON...pg?t=1219059817

 

 

as you can see its already at 100% of finalizing

 

please help me so i can burn them

some other backups did work its just for 2 these that have this

[mmalves]

I 19:10:12 Graph Data File: C:\Documents and Settings\Sir-System\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-W162C_TS07_DINSDAG-29-JULI-2008_18-15_CMC_MAG-D03-64_1x.ibg

I 19:10:12 Average Write Rate: 3.326 KB/s (2.4x) - Maximum Write Rate: 3.413 KB/s (2.5x)

There's a newer firmware TS12 available for your burner (you have TS07 at the moment) so you should apply, but remove any disc from the drive and close the tray before doing this.

 

The problem seems to be the dual-layer media you're using, which uses a poor quality dye. Try with Verbatim DVD+R DL 2.4x MKM-001-00 Made in Singapore blanks and it should work

[shiny]

ok thanks for the help ill try that

i used so many mine are already used up now hehe

 

thank you !