The burn button doesnt "HIGHLIGHT"...

[Over Powered By Computers]

I followed all the steps given by you to burn .VOB files to DVD... The only problem is the burn button just doesn't highlight and i dont understand why...

 

I have loads of AVI files that i needed to convert to DVD. I used VSO DivxToDVD to convert the files (which happened without any issue) and then used DVD Shrink 3.2 to Author (if that is what it was lol) them. The issue starts when i try to burn the damn thing to a disc.

 

 

Help... I am not a Computer Geek, so please go easy on the language..

 

Please help... I really dont want to spend the weekend trying to fix this...

 

Any help would be appreciated.

 

Thank You...

[cornholio7]

do you have a dvd burner?

please post a log

[Over Powered By Computers]

do you have a dvd burner?

please post a log

 

LOL.. Yah I do... Now where do i find the log bit... Let me give you some details related to me DVD player... Hope its one

 

 

This is the burner i have on my computer (LG GSA-H22N 18x Super-Multi DVD

[mmalves]

If the Write button isn't clickable then either the drive thinks the inserted disc isn't empty or it simply couldn't initalise/doesn't support that disc.

 

If you switch to Write mode (through the Mode menu), what's shown on the Information pane on the right of ImgBurn's window? If there's no text there, what does ImgBurn say in the status bar (Medium Not Present - some reason)?

[Over Powered By Computers]

If the Write button isn't clickable then either the drive thinks the inserted disc isn't empty or it simply couldn't initalise/doesn't support that disc.

 

If you switch to Write mode (through the Mode menu), what's shown on the Information pane on the right of ImgBurn's window? If there's no text there, what does ImgBurn say in the status bar (Medium Not Present - some reason)?

 

 

 

 

 

 

Hmmm... it does say Disc not empty but the disc is new and is empty...**hmph**

 

And when i switch to write mode... it shows the DVD writer, Location and everything else is marked as unknown....

 

The disc i am using at the moment is a Sony DVD-R (120 min/4.7 GB AccuCore)

 

[mmalves]

With ImgBurn in Write mode, please copy all the text shown in the Information pane and paste here so we can have a look at it

[Over Powered By Computers]

With ImgBurn in Write mode, please copy all the text shown in the Information pane and paste here so we can have a look at it

 

=====================================

 

 

HL-DT-ST DVD-RAM GSA-H22N 1.01 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2,672

Size: 5,472,256 bytes

Time: 00:37:47 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 2671)

-> LeadOut (LBA: 2672)

 

Pre-recorded Information:

Manufacturer ID: SONY16D1

 

Recording Management Area Information:

HL-DT-ST DVD-RAM GSA-H22N

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 199,279

Last Physical Sector in Layer 0: 0

 

=====================================

 

Would this do or you need something else...????

[mmalves]

HL-DT-ST DVD-RAM GSA-H22N 1.01 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2,672

Size: 5,472,256 bytes

Time: 00:37:47 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

That disc has already been burnt with a very small amount of data, so you'll need to try with another blank disc.

 

By the way, there's a newer firmware (1.02) available for your burner at http://au.lgservice.com/ in Device Driver -> DVD-ROM(Writer) -> page 5. Remove any disc from the burner and close the tray before applying this newer firmware. Reboot the computer after it has finished. In case you're wondering, having the latest firmware ensures best quality burns

[Over Powered By Computers]

HL-DT-ST DVD-RAM GSA-H22N 1.01 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2,672

Size: 5,472,256 bytes

Time: 00:37:47 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

That disc has already been burnt with a very small amount of data, so you'll need to try with another blank disc.

 

By the way, there's a newer firmware (1.02) available for your burner at http://au.lgservice.com/ in Device Driver -> DVD-ROM(Writer) -> page 5. Remove any disc from the burner and close the tray before applying this newer firmware. Reboot the computer after it has finished. In case you're wondering, having the latest firmware ensures best quality burns

 

 

 

Praise the LORD....

 

It worked... You not only saved my BP (LOL) but you also saved my weekend...

 

Thank you so very much... I have burnt the matter to the dvd, now the test is to see it working on a dvd player..

 

Will get back to you....Mwah

 

Life Saver.... ( YOUR HELP WAS REALLY APPRECIATED)