Hei Posted September 1, 2008 Posted September 1, 2008 (edited) Hi guys, I'm on a laptop and I tried burning some .rar files just now onto my 16x Mitsubishi DVD+Rs. The first two attempts were very successful, but not for the third. Here's my log: I 06:22:25 Source File Implementation Identifier: ImgBurn I 06:22:25 Source File File System(s): ISO9660, UDF (1.02) I 06:22:25 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HV02 (D:) (ATA) I 06:22:25 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x) I 06:22:25 Destination Media Sectors: 2,272,272 I 06:22:25 Write Mode: DVD I 06:22:25 Write Type: DAO I 06:22:25 Write Speed: 8x I 06:22:25 Link Size: Auto I 06:22:25 Test Mode: No I 06:22:25 OPC: No I 06:22:25 BURN-Proof: Enabled I 06:22:25 Book Type Setting: N/A I 06:22:25 Filling Buffer... (20 MB) I 06:22:26 Writing LeadIn... W 06:22:43 Failed to Write Sectors 544 - 575 - Reason: Write Error W 06:22:43 Retrying (1 of 20)... W 06:22:43 Retry Failed - Reason: Write Error W 06:22:43 Retrying (2 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (3 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (4 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (5 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (6 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (7 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (8 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (9 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (10 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (11 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (12 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (13 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (14 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (15 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (16 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (17 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (18 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (19 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write W 06:22:43 Retrying (20 of 20)... W 06:22:43 Retry Failed - Reason: Invalid Address For Write E 06:34:56 Failed to Write Sectors 544 - 575 - Reason: Write Error E 06:34:56 Next Writable Address: 0 I 06:34:56 Synchronising Cache... W 06:34:57 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 06:34:58 Synchronise Cache Failed! - Reason: Write Error W 06:34:58 Retrying (1 of 3)... W 06:34:59 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 06:34:59 Retry Failed - Reason: Write Error W 06:34:59 Retrying (2 of 3)... W 06:35:00 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 06:35:00 Retry Failed - Reason: Write Error W 06:35:00 Retrying (3 of 3)... W 06:35:01 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 06:35:01 Retry Failed - Reason: Write Error E 06:35:04 Synchronise Cache Failed! - Reason: Write Error I 06:35:04 Synchronising Cache (Last Attempt!)... E 06:35:04 Synchronise Cache Failed! - Reason: Unknown (0xA0, 0x80) W 06:35:04 User opted to skip the 'Close Track/Session/Disc' functions. E 06:35:04 Failed to Write Image! E 06:35:04 Operation Failed! - Duration: 00:12:38 I 06:35:04 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I'm currently using 2.4.1.0 and haven't updated yet for 2.4.2.0. The settings were the default ones. Is my DVD Drive dying? For your information, it's a HL-DT-ST DVDRAM GMA-4082N and it's able to read but not write at all. On a side note, I tried burning with Nero too but to no avail. Edited September 1, 2008 by Hei
blutach Posted September 1, 2008 Posted September 1, 2008 1. Update 2. If it can't write at all, you have either a batch of dodgy dics (unlikely) or a drive that can't write to those discs (look for a firmware update) or the drive is fcucked. You could try cleaning it, but new drives are cheap these days. Regards
mmalves Posted September 1, 2008 Posted September 1, 2008 I 06:22:25 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x)I 06:22:25 Destination Media Sectors: 2,272,272 That disc already was the result of a bad burn and got damaged in the process, so please throw it out (or use it as a coaster) and try a new blank disc. Also try burning at 4x to see if it works better. As blutach said, check with your laptop manufacturer for a firmware update for your burner. You may also want to try Verbatim or Taiyo Yuden 8x-rated blanks, as you might have more luck using them on a laptop burner. If after doing all this it still doesn't work, get a normal-size burner in an external enclosure, as laptop burners are too picky about the media they like and don't have too long of a lifespan
Hei Posted September 1, 2008 Author Posted September 1, 2008 (edited) Hi, it's me again. This time, I tried to burn an ISO instead of a batch of .rar files onto a CD-R. And guess what? It worked! I'm going to dig up a DVD-R and see if it's working or not. Wish me luck. I 07:09:55 ImgBurn Version 2.4.2.0 started! I 07:09:55 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 07:09:55 Total Physical Memory: 514,156 KB - Available: 198,236 KB I 07:09:55 Initialising SPTI... I 07:09:55 Searching for SCSI / ATAPI devices... I 07:09:55 Found 1 DVD-ROM and 1 DVD Edited September 1, 2008 by Hei
mmalves Posted September 1, 2008 Posted September 1, 2008 I 07:10:32 Destination Media Type: CD-R (Disc ID: 97m32s19f) (Speeds: 10x, 16x, 24x) Don't want to rain on your parade but it worked because you burned a CD, which is a whole different deal than DVD
Hei Posted September 2, 2008 Author Posted September 2, 2008 Well, the Titanium(?) DVD-R worked. It seems that for some reason, my drive rejects the Mitsubishi DVD+Rs. Damn. I'm not sure what's the problem, because it worked in the past. What's with the sudden hiccup? Anyway, here's the log for the DVD-R and it's an PS2 ISO. I 07:38:53 ImgBurn Version 2.4.2.0 started! I 07:38:53 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 07:38:53 Total Physical Memory: 514,156 KB - Available: 150,972 KB I 07:38:53 Initialising SPTI... I 07:38:53 Searching for SCSI / ATAPI devices... I 07:38:54 Found 1 DVD-ROM and 1 DVD
mmalves Posted September 2, 2008 Posted September 2, 2008 That's why we recommend Verbatim and Taiyo Yuden blanks: they have consistent high quality and work on most burners. Other brands may change the dye of the disc whenever they want, and this affects burn quality
Hei Posted September 2, 2008 Author Posted September 2, 2008 I guess I'll give Verbatim a go because I can't seem to find any Taiyo Yuden around my area. Oh, and another question. Is it actually suitable to burn an ISO or whatever image file on a DVD+R? Because I tried burning a PS2 image on a DVD+R before, and it isn't really responsive to my PS2. I wonder if that's the same for other images. Should I go for DVD+R or DVD-R?
mmalves Posted September 2, 2008 Posted September 2, 2008 My PS2s (two 39001 and one 50001) work fine with both DVD-R and DVD+R, but I've heard a lot of stories where PS2s worked better with one format than with the other. I guess you'll have to try both and find out which one your PS2 likes better
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now