afcmjt Posted September 7, 2008 Share Posted September 7, 2008 i am trying to backup my xbox 360 games and using imgburn i have version 2.4.2.0 it writes to double layer disk but when it verifys at 67% it comes up with the message I/o error! device: [0:0:0] TSST crop CDDVDW SH-S202J SB02 (D:) (ATA) scsistatus: 0x02 interpretation: check condition CDB: 28 00 00 27 34 60 00 00 01 00 interpretation: read(10)- sector:2569312 sense area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 00 00 00 00 interpretation: timeout on logical unit please can you help here my log I 16:34:59 ImgBurn Version 2.4.2.0 started! I 16:34:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:34:59 Total Physical Memory: 2,087,020 KB - Available: 1,612,652 KB I 16:34:59 Initialising SPTI... I 16:34:59 Searching for SCSI / ATAPI devices... I 16:34:59 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
afcmjt Posted September 7, 2008 Author Share Posted September 7, 2008 (edited) this is the mesage i get untitled.bmp Edited September 7, 2008 by afcmjt Link to comment Share on other sites More sharing options...
mmalves Posted September 7, 2008 Share Posted September 7, 2008 I 16:36:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) That's a poor quality dual-layer disc: it couldn't be read by the drive that burned it, do I need to say how bad is that? Switch to Verbatim DVD+R DL 2.4x (MKM-001-00 dye) Made in Singapore blanks and you should get good burns Link to comment Share on other sites More sharing options...
afcmjt Posted September 7, 2008 Author Share Posted September 7, 2008 ok great thanks had a feeling that was the prob, where can you recommend them from? many thanks Link to comment Share on other sites More sharing options...
Recommended Posts