Nariel Posted September 14, 2008 Posted September 14, 2008 Well, I'm a newbie, and I'm having some trouble with my dvd playback. I'm basically trying to make a backup copy of a movie, because I watch it a lot and I've had to replace it before - nothing illegal, just want to clear that up. Anyway, I used the DVD Decrypter to copy the video_ts folder to my hard drive, not going to go into detail cause that's against the rules, but it worked smoothly. Then, I used ImgBurn to create the dvd (I followed a guide for this), and it seemed to go fairly well. Then, I tried to play it in my Dvd player, and it skipped and jumped and the picture was all scrambled. I looked online and followed the suggestion of using a slower write speed, which I did, the slowest one (1x), and it worked a little better but not much better. I'm using what seems to be a recommended/popular blank dvd-r as well, a Verbatim 8x single layer, but my hard drive is a little old. I also tried several different movies to see if that might be the problem, but I'm still getting the same results. I'm not sure what it is, exactly, and I tried a few times, but mostly it just seems like I'm wasting dvds, time, and money. You guys ask for the logs a lot, so here's the most recent: ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Sunday, 14 September 2008, 00:11:24 ; \\****************************************// ; ; I 00:11:17 ImgBurn Version 2.4.2.0 started! I 00:11:17 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 00:11:17 Total Physical Memory: 1,015,328 KB - Available: 574,888 KB I 00:11:17 Initialising SPTI... I 00:11:17 Searching for SCSI / ATAPI devices... I 00:11:17 Found 1 DVD
mmalves Posted September 14, 2008 Posted September 14, 2008 Can you post the log from when you've burned the disc? You'll find it further down in the ImgBurn.log file.
Recommended Posts