Takes a long time to write LeadIn

[knighToFdemonS]

Hey!

So...when I try to burn, my drive often hangs up on writing leadin.

Takes about 45min to abort or a nex retry (than it works).

Here a log, first one abortet and second time just leave it running:

 

I 13:58:00 ImgBurn Version 2.4.2.0 started!

I 13:58:00 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 13:58:00 Total Physical Memory: 1.047.124 KB - Available: 587.608 KB

I 13:58:00 Initialising SPTI...

I 13:58:00 Searching for SCSI / ATAPI devices...

I 13:58:00 Found 1 DVD

[mmalves]

I 13:58:56 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-W162C TS10 (F:) (ATA)

I 13:58:56 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x; 8x; 12x; 16x)

I 13:58:56 Write Speed: 4x

E 14:45:11 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

There's firmware TS12 available for your burner. Remove any disc from the drive and close the tray before updating. Reboot after the update has finished. You should also get better media, such as Verbatim and Taiyo Yuden blanks, as the one you're using right now has a :& quality dye.

 

By the way, it's burning at 4x because you chose that speed in the Device tab of Build mode

[knighToFdemonS]

hey thanks for the answer. sorry i've moved last week, so i couldnt answer.

 

mhmh ok i've updatet (worked without problems) aaand...it still doesnt work:

 

I 00:28:09 ImgBurn Version 2.4.2.0 started!

I 00:28:09 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 00:28:09 Total Physical Memory: 1.047.124 KB - Available: 381.200 KB

I 00:28:09 Initialising SPTI...

I 00:28:09 Searching for SCSI / ATAPI devices...

I 00:28:09 Found 1 DVD

[LOCOENG]

You are still using the same crapola discs

[lfcrule1972]

As posted above by mmalves and loco try some decent quality media like Taiyo Yuden or Verbs