erickonais Posted October 2, 2008 Share Posted October 2, 2008 I did a search but the topic i found i guess i didnt understand what the solution was...i have a lightscribe usb dvd dl burner and when i try to burn a game iso i get the following error: failed to set L0 data zone capacity no additional sense information... I,m using a lightscribe dvdwriter USB LOG I 11:46:13 Source File File System(s): ISO9660, UDF (1.02) I 11:46:13 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH22LP20 1.00 (F:) (USB) I 11:46:13 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) I 11:46:13 Destination Media Sectors: 4,173,824 I 11:46:13 Write Mode: DVD I 11:46:13 Write Type: DAO I 11:46:13 Write Speed: 2x I 11:46:13 Link Size: Auto I 11:46:13 Test Mode: No I 11:46:13 OPC: No I 11:46:13 BURN-Proof: Enabled I 11:46:13 Book Type Setting: N/A I 11:46:13 User Specified L0 Data Zone Capacity: 1,913,760 E 11:49:32 Failed to set L0 Data Zone Capacity! E 11:49:32 Reason: No Additional Sense Information E 11:49:32 Operation Failed! - Duration: 00:03:19 I 11:49:32 Average Write Rate: N/A - Maximum Write Rate: N/A some other info HL-DT-ST DVD-RAM GH22LP20 1.00 (USB) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 3,827,520 Free Space: 7,838,760,960 bytes Free Time: 850:35:45 (MM:SS:FF) Supported Write Speeds: 4x DVD Link to comment Share on other sites More sharing options...
LOCOENG Posted October 2, 2008 Share Posted October 2, 2008 Hi Eric, please post the entire log. Link to comment Share on other sites More sharing options...
erickonais Posted October 2, 2008 Author Share Posted October 2, 2008 (edited) Thank you sorry about that I 11:45:26 ImgBurn Version 2.4.2.0 started! I 11:45:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 11:45:26 Total Physical Memory: 1,036,864 KB - Available: 233,680 KB I 11:45:26 Initialising SPTI... I 11:45:26 Searching for SCSI / ATAPI devices... I 11:45:26 Found 2 DVD-ROMs, 1 DVD Edited October 2, 2008 by erickonais Link to comment Share on other sites More sharing options...
LOCOENG Posted October 2, 2008 Share Posted October 2, 2008 Looks like your layer break is set wrong....should be: I 13:12:19 Writing Layer 0... (LBA: 0 - 1913759) I 13:24:02 Writing Layer 1... (LBA: 1913760 - 3825923) yours is set to 1913760. You've also chosen 2X as your write speed, but your drive only supports 4X for this disc. If resetting your layer break doesn't help you'll need to get some Verbatim discs. Link to comment Share on other sites More sharing options...
erickonais Posted October 2, 2008 Author Share Posted October 2, 2008 Thank you i will change that and see what happens Link to comment Share on other sites More sharing options...
Recommended Posts