gstevens26 Posted October 3, 2008 Posted October 3, 2008 Hi guys, i'm new to the forum so hope someone can help as i'm wasting DVD's like they are going out of fashion. I've got a Sony AW-G170A DVD drive which is actually an NEC underneath the labelling and i'm having problems burning DL disks with imgburn. I've been trying to burn off some XBOX 360 game iso Backups i've got but out of about 8 attempts using my burner only 2 have completed the burn successfully with only 1 of them actually playing on the XBOX, the rest have started to burn then given write errors. The one that actually worked, i'd changed the booktype in the NEC tab to Drive (For DVD+R DL Media - Temporary) and changed it to DVD-ROM and it worked perfectly. This was on Wednesday night. I came to try it again last night and tried to set the booktype to this setting again and it's now giving an error saying Failed Unknown! Invalid field in CDB as soon as i select this booktype from the dropdown! Nothing had changed with my system since it worked so I'm confused and if I select any of the other booktypes and try and burn it just fails with write errors. Please Help. It's really bugging me. If it had just kept on failing i would have just given up and bought a better DVD drive but the fact it worked ok with this setting and I can no longer select it, it has kept me going to try and get it working well.
LIGHTNING UK! Posted October 3, 2008 Posted October 3, 2008 If the temporary ones don't work then the one stored in the firmware probably will - and it's not something you have to change every time. You set it once and forget about it. ImgBurn handles the temporary ones (when they're supported) as part of it's 'auto change book type' setting... so again, it's not something you need to worry about.
gstevens26 Posted October 3, 2008 Author Posted October 3, 2008 So have I probably messed it up trying to re-assign that particular setting or is it more likely that i've got other problems. I know the media i'm using isn't top notch but they work fine in my brothers laptop which i have been using whilst i've been trying to get mine going. Do you know what the error i'm getting when assigning these book types means?
LIGHTNING UK! Posted October 3, 2008 Posted October 3, 2008 Yeah it means the drive doesn't support the command. That's to be expected, only certain drives with certain firmware support the entire set of booktype commands. So ignore the temporary one and look at the 'Drive (For DVD+R DL Media)' one instead. Make that say DVD-ROM and the drive will remember it forever. Oh and just because your bothers laptop works with the discs it doesn't mean yours will. We ONLY recommend Verbatim DVD+R DL discs here for DL burning.
gstevens26 Posted October 3, 2008 Author Posted October 3, 2008 I find it annoying that it let me use that setting and now it errors, especially as the burn worked when it was set to that, will have to just lump it. Gonna get some Verbatim's and see what they do and hopefully that will be it. Thanks for your responses mate.
LIGHTNING UK! Posted October 3, 2008 Posted October 3, 2008 Have you looked at the non temp one?! Seriously, you pretty much need to have hacked firmware to use the temp one. NEC don't enable them by default, only the 3rd party people like buffalo do. If the 'Drive (For DVD+R DL Media)' option is set to DVD-ROM then you've nothing to worry about. Your disc WILL have the DVD-ROM booktype. If there's a problem playing them then it's probably down to the media you're using and the quality of the burn achieved by your drive/firmware.
gstevens26 Posted October 3, 2008 Author Posted October 3, 2008 Get the same CDB error on that one too. I did upgrade the firmware of my drive to 1.73 and it wasn't an OEM one but one I got from a site called Liggy and Dee which i found through CD Freaks. The flash worked fine and it did burn with this firmware installed. I'm inclined to think it's the media but it's still irritating.
LIGHTNING UK! Posted October 3, 2008 Posted October 3, 2008 Put one of the DL discs you've just burnt back in the drive and copy + paste everything from the disc info panel on the right.
gstevens26 Posted October 6, 2008 Author Posted October 6, 2008 I re-flashed my Drive on Saturday which means that is now showing up as and Optiarc drive as opposed to a Sony. Ran a burn using the booktype Drive for DVD+R DL and it completed the burn successfully. The disk works in the xbox but after a few minutes it gives the disk unreadable, Clean with a soft cloth error so I think the drive is a bit tired... is there any way to increase the power of the lens on a drive to improve the burn quality??
LIGHTNING UK! Posted October 6, 2008 Posted October 6, 2008 No, the drive controls burn quality itself. Are you using Verbatim MKM-001-00 media as I suggested in an earlier post? That's probably the most important piece of advice I can give you.
gstevens26 Posted October 6, 2008 Author Posted October 6, 2008 Not yet. Haven't bought any yet. Where's can I get them from?
dontasciime Posted October 6, 2008 Posted October 6, 2008 Not yet. Haven't bought any yet. Where's can I get them from? where do you live ? The internet
gstevens26 Posted October 6, 2008 Author Posted October 6, 2008 Cheshire, england - Had a look online but can only find them in america!!!
ct2007 Posted October 6, 2008 Posted October 6, 2008 Can somebody please help I am trying to burn xbox 360 games I load up the file in imgburn and it goes to write in lead and then fails comes up as error message Interpretation: Check Condition Write Error Please can somebody tell me what this means as really annoyed want to start playing Fifa 09 Thanks
dontasciime Posted October 6, 2008 Posted October 6, 2008 Please can somebody tell me what this means as really annoyed want to start playing Fifa 09 Use the original then
LOCOENG Posted October 6, 2008 Posted October 6, 2008 http://svp.co.uk/product/verbatim_24x_doub...562)_verbati114
LOCOENG Posted October 6, 2008 Posted October 6, 2008 Can somebody please help I am trying to burn xbox 360 games I load up the file in imgburn and it goes to write in lead and then fails comes up as error message Interpretation: Check Condition Write Error Please can somebody tell me what this means as really annoyed want to start playing Fifa 09 Thanks hijacker
ct2007 Posted October 6, 2008 Posted October 6, 2008 Can somebody please help I am trying to burn xbox 360 games I load up the file in imgburn and it goes to write in lead and then fails comes up as error message Interpretation: Check Condition Write Error Please can somebody tell me what this means as really annoyed want to start playing Fifa 09 Thanks hijacker What does this mean I thought I might get some answers on here
LOCOENG Posted October 6, 2008 Posted October 6, 2008 It means start your own thread so the original poster doesn't get confused with advice we are giving you and vice versa.
LOCOENG Posted October 6, 2008 Posted October 6, 2008 No problem, just start a thread for your specific problem.
lfcrule1972 Posted October 7, 2008 Posted October 7, 2008 Also, try and be careful about how you word your posts We don't encourage any form of piracy here
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now