Jump to content

Problem burning xbox 360 games


y0itzflip

Recommended Posts

its weird because the first time i burned a with a sony DL and worked perfect...2nd time couldnt finalize... that was my last of the sonys... (bought a 2 pack)

 

went out today and got verbatim and i burned successfully the first time...

 

 

 

after that i burned and it got to 100% but couldnt finilize the disc.

 

now when i try to burn it cannot set L0 or something like that....

 

 

now i just tried to burn to get the log and now its working. so i will see what happens at the end of this burn and update

 

but why would it work sometimes and not others? i updated my firmware AND drivers...

 

update u guys in 40 mins

Link to comment
Share on other sites

ok just finished got the same error while trying to close the final session

 

also it got an error at 50% but i pressed retry and it started again...

 

E 00:37:40 Failed to set L0 Data Zone Capacity!

E 00:37:40 Reason: Power Calibration Area Error

E 00:37:40 Operation Failed! - Duration: 00:00:05

I 00:37:40 Average Write Rate: N/A - Maximum Write Rate: N/A

I 00:37:45 Operation Started!

I 00:37:45 Source File: C:\Downloads\purex-imars.dvd

I 00:37:45 Source File Sectors: 3,825,924 (MODE1/2048)

I 00:37:45 Source File Size: 7,835,492,352 bytes

I 00:37:45 Source File Volume Identifier: XGD2DVD_NTSC

I 00:37:45 Source File Volume Set Identifier: 34672923

I 00:37:45 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:37:45 Source File File System(s): ISO9660, UDF (1.02)

I 00:37:45 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 00:37:45 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 0x, 2.4x)

I 00:37:45 Destination Media Sectors: 4,173,824

I 00:37:45 Write Mode: DVD

I 00:37:45 Write Type: DAO

I 00:37:45 Write Speed: 1x

I 00:37:45 Link Size: Auto

I 00:37:45 Test Mode: No

I 00:37:45 OPC: No

I 00:37:45 BURN-Proof: Enabled

I 00:37:45 Book Type Setting: DVD-ROM

I 00:37:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 00:37:45 Optimal L0 Data Zone Capacity: 1,913,760

I 00:37:45 Optimal L0 Data Zone Method: Copied From Original Disc

E 00:40:17 Failed to set L0 Data Zone Capacity!

E 00:40:17 Reason: Power Calibration Area Error

E 00:40:17 Operation Failed! - Duration: 00:02:32

I 00:40:17 Average Write Rate: N/A - Maximum Write Rate: N/A

I 00:45:53 Operation Started!

I 00:45:53 Source File: C:\Downloads\purex-imars.dvd

I 00:45:53 Source File Sectors: 3,825,924 (MODE1/2048)

I 00:45:53 Source File Size: 7,835,492,352 bytes

I 00:45:53 Source File Volume Identifier: XGD2DVD_NTSC

I 00:45:53 Source File Volume Set Identifier: 34672923

I 00:45:53 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:45:53 Source File File System(s): ISO9660, UDF (1.02)

I 00:45:53 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 00:45:53 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 0x, 2.4x)

I 00:45:53 Destination Media Sectors: 4,173,824

I 00:45:53 Write Mode: DVD

I 00:45:53 Write Type: DAO

I 00:45:53 Write Speed: 1x

I 00:45:53 Link Size: Auto

I 00:45:53 Test Mode: No

I 00:45:53 OPC: No

I 00:45:53 BURN-Proof: Enabled

I 00:45:54 Book Type Setting: DVD-ROM

I 00:45:54 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 00:45:54 Optimal L0 Data Zone Capacity: 1,913,760

I 00:45:54 Optimal L0 Data Zone Method: Copied From Original Disc

I 00:46:18 Filling Buffer... (20 MB)

I 00:46:19 Writing LeadIn...

I 00:46:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 00:46:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 00:46:21 Writing Layer 0... (LBA: 0 - 1913759)

I 01:05:57 Writing Layer 1... (LBA: 1913760 - 3825923)

W 01:05:58 Failed to Write Sectors 1913760 - 1913791 - Reason: Power Calibration Area Error

W 01:05:58 Retrying (1 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (2 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (3 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (4 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (5 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (6 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (7 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (8 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (9 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (10 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (11 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (12 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (13 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (14 of 20)...

W 01:05:59 Retry Failed - Reason: Power Calibration Area Error

W 01:05:59 Retrying (15 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:06:00 Retrying (16 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:06:00 Retrying (17 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:06:00 Retrying (18 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:06:00 Retrying (19 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:06:00 Retrying (20 of 20)...

W 01:06:00 Retry Failed - Reason: Power Calibration Area Error

W 01:19:43 Retrying (21)...

I 01:19:45 Writing Sectors...

I 01:39:24 Synchronising Cache...

I 01:39:28 Closing Track...

W 01:39:29 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:39:29 Close Track Failed! - Reason: Power Calibration Area Error

W 01:39:29 Retrying (1 of 3)...

W 01:39:30 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:39:30 Retry Failed - Reason: Power Calibration Area Error

W 01:39:30 Retrying (2 of 3)...

W 01:39:31 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:39:31 Retry Failed - Reason: Power Calibration Area Error

W 01:39:31 Retrying (3 of 3)...

W 01:39:32 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:39:32 Retry Failed - Reason: Power Calibration Area Error

W 01:42:36 Retrying (4)...

W 01:42:37 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:37 Retry Failed - Reason: Power Calibration Area Error

W 01:42:38 Retrying (5)...

W 01:42:39 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:39 Retry Failed - Reason: Power Calibration Area Error

W 01:42:39 Retrying (6)...

W 01:42:40 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:40 Retry Failed - Reason: Power Calibration Area Error

W 01:42:41 Retrying (7)...

W 01:42:42 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:42 Retry Failed - Reason: Power Calibration Area Error

W 01:42:42 Retrying (8)...

W 01:42:43 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:43 Retry Failed - Reason: Power Calibration Area Error

W 01:42:44 Retrying (9)...

W 01:42:45 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:45 Retry Failed - Reason: Power Calibration Area Error

W 01:42:45 Retrying (10)...

W 01:42:46 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power Calibration Area Error

W 01:42:46 Retry Failed - Reason: Power Calibration Area Error

I 01:42:47 Closing Track (Last Attempt!)...

E 01:42:47 Close Track Failed! - Reason: Power Calibration Area Error

I 01:42:47 Finalising Disc...

W 01:42:47 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:47 Retrying (1 of 3)...

W 01:42:47 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:47 Retrying (2 of 3)...

W 01:42:47 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:47 Retrying (3 of 3)...

W 01:42:47 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:49 Retrying (4)...

W 01:42:49 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:49 Retrying (5)...

W 01:42:49 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 01:42:50 Retrying (6)...

W 01:42:50 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

E 01:42:51 Failed to Write Image!

I 01:42:51 Exporting Graph Data...

I 01:42:51 Graph Data File: C:\Documents and Settings\fLip\Application Data\ImgBurn\Graph Data Files\LITE-ON_DVDRW_SHW-160P6S_PS0C_FRIDAY-OCTOBER-10-2008_12-45_AM_MKM-001-00_1x.ibg

I 01:42:51 Export Successfully Completed!

E 01:42:51 Operation Failed! - Duration: 00:56:57

I 01:42:51 Average Write Rate: 2,403 KB/s (1.7x) - Maximum Write Rate: 3,387 KB/s (2.4x)

 

 

thanks for any help !!

Edited by y0itzflip
Link to comment
Share on other sites

E 01:42:47 Close Track Failed! - Reason: Power Calibration Area Error

 

Your drive is on the way out....actually looks like it's already out.

 

I 01:56:07 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 01:56:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

 

Same discs and your drive reports differently each time....

 

I 00:45:53 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 00:45:53 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 0x, 2.4x)

 

Check that your USB cable isn't defective. Otherwise a new drive is in your future. Dinosaur today, fossil tomorrow.

Link to comment
Share on other sites

thanks. ill give my other computer a try to see if it makes a difference...

 

 

its just weird that sometimes it will burn the iso completely fine...then it starts to give errors..

 

 

any suggestions on another external burner for my laptop?

Edited by y0itzflip
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.