Problem burning xbox 360 games

y0itzflip · October 10, 2008

its weird because the first time i burned a with a sony DL and worked perfect...2nd time couldnt finalize... that was my last of the sonys... (bought a 2 pack)

went out today and got verbatim and i burned successfully the first time...

after that i burned and it got to 100% but couldnt finilize the disc.

now when i try to burn it cannot set L0 or something like that....

now i just tried to burn to get the log and now its working. so i will see what happens at the end of this burn and update

but why would it work sometimes and not others? i updated my firmware AND drivers...

update u guys in 40 mins

**LOCOENG** · October 10, 2008

A log would help us help you :thumbup:

y0itzflip · October 10, 2008

ok just finished got the same error while trying to close the final session

also it got an error at 50% but i pressed retry and it started again...

E 00:37:40 Failed to set L0 Data Zone Capacity!

E 00:37:40 Reason: Power Calibration Area Error

E 00:37:40 Operation Failed! - Duration: 00:00:05

I 00:37:40 Average Write Rate: N/A - Maximum Write Rate: N/A

I 00:37:45 Operation Started!

I 00:37:45 Source File: C:\Downloads\purex-imars.dvd

I 00:37:45 Source File Sectors: 3,825,924 (MODE1/2048)

I 00:37:45 Source File Size: 7,835,492,352 bytes

I 00:37:45 Source File Volume Identifier: XGD2DVD_NTSC

I 00:37:45 Source File Volume Set Identifier: 34672923

I 00:37:45 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:37:45 Source File File System(s): ISO9660, UDF (1.02)

I 00:37:45 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 00:37:45 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 0x, 2.4x)

I 00:37:45 Destination Media Sectors: 4,173,824

I 00:37:45 Write Mode: DVD

I 00:37:45 Write Type: DAO

I 00:37:45 Write Speed: 1x

I 00:37:45 Link Size: Auto

I 00:37:45 Test Mode: No

I 00:37:45 OPC: No

I 00:37:45 BURN-Proof: Enabled

I 00:37:45 Book Type Setting: DVD-ROM

I 00:37:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 00:37:45 Optimal L0 Data Zone Capacity: 1,913,760

I 00:37:45 Optimal L0 Data Zone Method: Copied From Original Disc

E 00:40:17 Failed to set L0 Data Zone Capacity!

E 00:40:17 Reason: Power Calibration Area Error

E 00:40:17 Operation Failed! - Duration: 00:02:32

I 00:40:17 Average Write Rate: N/A - Maximum Write Rate: N/A

I 00:45:53 Operation Started!

I 00:45:53 Source File: C:\Downloads\purex-imars.dvd

I 00:45:53 Source File Sectors: 3,825,924 (MODE1/2048)

I 00:45:53 Source File Size: 7,835,492,352 bytes

I 00:45:53 Source File Volume Identifier: XGD2DVD_NTSC

I 00:45:53 Source File Volume Set Identifier: 34672923

I 00:45:53 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:45:53 Source File File System(s): ISO9660, UDF (1.02)

I 00:45:53 Destination Device: [0:0:0] LITE-ON DVDRW SHW-160P6S PS0C (E:) (USB)

I 00:45:53 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 0x, 2.4x)

I 00:45:53 Destination Media Sectors: 4,173,824

I 00:45:53 Write Mode: DVD

I 00:45:53 Write Type: DAO

I 00:45:53 Write Speed: 1x

I 00:45:53 Link Size: Auto

I 00:45:53 Test Mode: No

I 00:45:53 OPC: No

I 00:45:53 BURN-Proof: Enabled

I 00:45:54 Book Type Setting: DVD-ROM

I 00:45:54 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 00:45:54 Optimal L0 Data Zone Capacity: 1,913,760

I 00:45:54 Optimal L0 Data Zone Method: Copied From Original Disc

I 00:46:18 Filling Buffer... (20 MB)

I 00:46:19 Writing LeadIn...

I 00:46:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 00:46:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 00:46:21 Writing Layer 0... (LBA: 0 - 1913759)

I 01:05:57 Writing Layer 1... (LBA: 1913760 - 3825923)

W 01:05:58 Failed to Write Sectors 1913760 - 1913791 - Reason: Power Calibration Area Error

W 01:05:58 Retrying (1 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (2 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (3 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (4 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (5 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (6 of 20)...

W 01:05:58 Retry Failed - Reason: Power Calibration Area Error

W 01:05:58 Retrying (7 of 20)...