vendris Posted October 17, 2008 Posted October 17, 2008 (edited) UPDATE: While it's still burning its going full speed again, where it was constantly 0 kb/s with a shitload of errors, its now burning 4x speed steadily again, as of the latest log update (18:38) UPDATE: WOOPS Seems I was burning at 2,4x while disk is minimum of 4x could THIS be the problem? I doubt it as imgburn automatically started burning at 4x.... For what it's worth, disc completed successfully but is NOT playable, so its a bad burn. I 18:49:55 Synchronising Cache...I 18:49:58 Closing Track...I 18:50:01 Finalising Disc...I 18:50:35 Exporting Graph Data...I 18:50:35 Graph Data File: I 18:50:35 Export Successfully Completed!I 18:50:35 Operation Successfully Completed! - Duration: 01:04:07I 18:50:35 Average Write Rate: 2.038 KB/s (1.5x) - Maximum Write Rate: 5.618 KB/s (4.1x)Seems it completed successfully, but what the hell was going here? This is a dedicated machine purely for the purpose of burning, and file servering, while burning the server part was completely shut down, as I always do when burning discs, exact the same processes, 2 minutes before this disc I finalized another disc, with same media type, these are VERBATIM DL's, I never use a different brand, ever. Im not that known with the error codes etc, but it seems the trouble started at layer 2, if thats relevant.\ (I would like to ask if layer 2 is located closest to writable area of the disk, or more to the readable area of the disk << this is irrelevant but I would like to know anyway) This happened while burning a game backup, the log is as following: In fact, its still happening at the moment, lol! I 17:41:58 ImgBurn Version 2.4.2.0 started! I 17:41:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 17:41:58 Total Physical Memory: 2.096.364 KB - Available: 1.500.116 KB I 17:41:58 Initialising SPTI... I 17:41:58 Searching for SCSI / ATAPI devices... I 17:41:59 Found 1 DVD-ROM and 1 DVD Edited October 17, 2008 by vendris
mmalves Posted October 17, 2008 Posted October 17, 2008 I 17:46:27 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) Those are the 8x rated Verbatim DVD+R DL blanks, so try burning them at 8x or 6x to see if it works. If it doesn't, try getting the 2.4x rated ones (MKM-001-00 dye) made in Singapore (the ones made in India are inferior quality) or get a new burner, which may have better support for the 8x blanks
blutach Posted October 18, 2008 Posted October 18, 2008 UPDATE: While it's still burning its going full speed again, where it was constantly 0 kb/s with a shitload of errors, its now burning 4x speed steadily again, as of the latest log update (18:38) UPDATE: WOOPS Seems I was burning at 2,4x while disk is minimum of 4x could THIS be the problem? I doubt it as imgburn automatically started burning at 4x.... For what it's worth, disc completed successfully but is NOT playable, so its a bad burn. I 18:49:55 Synchronising Cache...I 18:49:58 Closing Track...I 18:50:01 Finalising Disc...I 18:50:35 Exporting Graph Data...I 18:50:35 Graph Data File: I 18:50:35 Export Successfully Completed!I 18:50:35 Operation Successfully Completed! - Duration: 01:04:07I 18:50:35 Average Write Rate: 2.038 KB/s (1.5x) - Maximum Write Rate: 5.618 KB/s (4.1x)Seems it completed successfully, but what the hell was going here? And verify your burns. Regards
Recommended Posts