bhydra Posted October 19, 2008 Share Posted October 19, 2008 (edited) . Edited May 27, 2018 by blackhydra866 Link to comment Share on other sites More sharing options...
LOCOENG Posted October 19, 2008 Share Posted October 19, 2008 If there is an mds accompanying the ISO I typically choose it out of habit, but unless you are burning a DL disc it really doesn't matter. Link to comment Share on other sites More sharing options...
bhydra Posted October 19, 2008 Author Share Posted October 19, 2008 (edited) . Edited May 27, 2018 by blackhydra866 Link to comment Share on other sites More sharing options...
Cynthia Posted October 19, 2008 Share Posted October 19, 2008 "The most common 12 cm DVD-R disc has 2,298,496 sectors, 2048 bytes each; it holds 2,298,496*2048=4,707,319,808 bytes, or 2,298,496*2=4,596,992 KB, or 2,298,496/512=4489.25 MB, or 2,298,496/(512*1024)=4.38 GB of data. http://club.cdfreaks.com/f33/actual-size-dvd-r-4-7gb-139256/ The difference is that there are different definitions on megabyte and gigabyte. When the program shows how many megabyte the disc can hold it uses the same definition of megabyte as Windows does, 1 megabyte = 1024 X 1024. Disc manufactures uses the same definition as producers of hard disks does, 1 megabyte = 1000 X 1000. But in reality it's the same amount of data that they are talking about. 4483 megabyte = 4483 X 1024 X 1024 = 4700766208 bytes = 4,7 GB. Link to comment Share on other sites More sharing options...
volvofl10 Posted October 19, 2008 Share Posted October 19, 2008 I made 3 isos of dvds, and for some reason the third one creates an addition .mds file along with the iso. 1st iso- 1.02GB 2nd iso- 3.81GB 3rd iso- 4.50GB I'm thinking its because of the file size? But the real question here is should I burn just the iso or the mds? As its to large for single layer, IB decided to create an .mds file , which as Loco said unless your burning Dual layer , it doesnt matter. Your ISO IS a dual layer size project, so the .MDS file you have will hold all the info about the layer break Link to comment Share on other sites More sharing options...
bhydra Posted October 19, 2008 Author Share Posted October 19, 2008 (edited) . Edited May 27, 2018 by blackhydra866 Link to comment Share on other sites More sharing options...
Cynthia Posted October 19, 2008 Share Posted October 19, 2008 Only if you have a DL disc. It will not work with a single layer disc. Link to comment Share on other sites More sharing options...
bhydra Posted October 19, 2008 Author Share Posted October 19, 2008 (edited) . Edited May 27, 2018 by blackhydra866 Link to comment Share on other sites More sharing options...
Cynthia Posted October 19, 2008 Share Posted October 19, 2008 When you are in the build mode and then in tab Advanced, you can set the media type you are planning to use for the burning of the image. Link to comment Share on other sites More sharing options...
bhydra Posted October 19, 2008 Author Share Posted October 19, 2008 (edited) . Edited May 27, 2018 by blackhydra866 Link to comment Share on other sites More sharing options...
Cynthia Posted October 19, 2008 Share Posted October 19, 2008 The question still remains - do you want to burn the 'oversized' image on a DL disc or on a single layer disc? If the later - you need to get it down in size first. Link to comment Share on other sites More sharing options...
Recommended Posts