Padre Pio Posted November 14, 2008 Posted November 14, 2008 Sorry for my bad english. I have burned around 500 dvd-r and dvd+r on the same burner, it does always burn 100%. Did also burn 5 dvd+r dl(dont remember brand) for 6 mnd ago, without any problems. But with these new discs it will not get past 50 % (stops almost always on 19-20%) Disc type : Traxdata DVD+R DL 8x Number discs tested : 10 Tested with max speed, 2 X and 4 X I have 2 diffrent images I have tested on, same thing happens. Burner FW is upgraded to latest verson. I also did try to get my money back, but they only gave me an new 10-pack:/ Please help me :] The log from last burning : I 21:05:29 ImgBurn Version 2.4.2.0 started! I 21:05:29 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:05:29 Total Physical Memory: 2
mmalves Posted November 14, 2008 Posted November 14, 2008 I 21:05:57 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202H SB00 (D:) (ATA)I 21:05:57 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x) Latest firmware for your burner is SB01, so you should apply it (remove any disc and close the tray before doing it). Also please read this post as it's relevant to your problem.
Cynthia Posted November 14, 2008 Posted November 14, 2008 Hi and welcome to the forum, Padre Pio! There is a later version of the firmware, that might give better support for those discs. Not the best brand to use and it might have problems with certain writers. http://www.samsungodd.com/Eng/Firmware/FWD...amp;image1.y=12 If you update: No disc in the tray Tray closed Restart the computer after the update Edit: I'm Mrs Late...
Recommended Posts