Problem with burning at low speeds

[kayne31]

I have a problem I need to write DVD's at low speed I.E. 2 - 2.4 however when using imgburn even if I set the write speed at 2.4 it always burns at 4x and as you can see from the info below it states the minimum write speed is 4x I use these discs and writer with another burn program and it copies at 2x no problem can you help!!!

 

TSSTcorp CD/DVDW SH-S182M SB05 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x, 18x

 

Pre-recorded Information:

Manufacturer ID: TYG03

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 0

Last Physical Sector in Layer 0: 0

[LIGHTNING UK!]

If the drive says it only supports 4x upwards then that other program is lying.

 

8x or 12x will give you perfectly decent burns on those discs.