Jump to content

I/O problem...


Recommended Posts

I 21:40:50 ImgBurn Version started!

I 21:40:50 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 21:40:50 Total Physical Memory: 2,086,208 KB - Available: 1,075,584 KB

I 21:40:50 Initialising SPTI...

I 21:40:50 Searching for SCSI / ATAPI devices...

I 21:41:10 Found 1 DVD

Link to comment
Share on other sites

I 21:41:54 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

I 21:41:54 Destination Media Sectors: 4,173,824W 22:09:56 Failed to Write Sectors 2568048 - 2568079 - Reason: No Write Current

W 22:09:56 Retrying (1 of 20)...

W 22:09:56 Retry Failed - Reason: Cannot Write Medium - Incompatible Format


Any ideas???!???




firstly , its not an I/O error like the topic suggests, see whats highlighted in red above Incompatible Format Its as Cynthia said above, crap media,and your drive just doesnt recognise it not long after it starts writing to the second layer. change to verbatim for DL work as the link cynthia provided suggests.

Link to comment
Share on other sites

For -R most of us use Taiyo Yuden TYG02 8x , which are usually only available from online stores. You can get 12x and 16x , these are marked as TYG03 , but i prefer the older 8x TYG02's.

look at the link in Cynthia's post above , i think it suggests what stores are in the US who supply these as well as the DL verbatims.



better still, post a log file in case your problem is being caused by something else :thumbup:

Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.