MJames Posted November 30, 2008 Share Posted November 30, 2008 Hello I am new to the forum I have a question about imgburn I am trying to us it. I am copying a folder to CD-r it has been a hour now and it still says reading sectors, does it take this long for that. The complete bar indicator is at 99% in the log it says end disc found. Is this ok or will it get to the point of writing to the disc. thanks MJames Link to comment Share on other sites More sharing options...
Cynthia Posted November 30, 2008 Share Posted November 30, 2008 Hi and welcome to the forum, MJames! You are using the Build mode? Sounds as something is not right. Has it worked before? Link to comment Share on other sites More sharing options...
MJames Posted November 30, 2008 Author Share Posted November 30, 2008 (edited) Hi Cynthia, Thank you for the welcome, this is the first time I am using imgburn I know something must not be right. I looked over instructions I was able to choose the option of image file from disc as mention I did that at 10:34am but its still going. I looked at the log see below ... I 10:33:28 ImgBurn Version 2.4.2.0 started! I 10:33:28 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 10:33:28 Total Physical Memory: 196,076 KB - Available: 23,060 KB W 10:33:28 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 10:33:28 Drive M:\ (FAT32) does not support single files > 4 GB in size. I 10:33:28 Initialising SPTI... I 10:33:28 Searching for SCSI / ATAPI devices... I 10:33:28 Found 1 DVD-ROM, 1 DVD+RW and 1 DVD Edited November 30, 2008 by MJames Link to comment Share on other sites More sharing options...
Cynthia Posted November 30, 2008 Share Posted November 30, 2008 If you insert the disc and use the read mode, there is a panel/info window in the right side of the program. Can you copy that info. It should be something like this: PIONEER DVD-RW DVR-115D 1.22 (ATA)Current Profile: CD-RW Disc Information: Status: Complete Erasable: Yes Sessions: 1 Sectors: 25 Link to comment Share on other sites More sharing options...
MJames Posted November 30, 2008 Author Share Posted November 30, 2008 IDE-DVD DROM6216 HD08 (ATA) Current Profile: CD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 62,255 Size: 127,498,240 bytes Time: 13:52:05 (MM:SS:FF) TOC Information: Session 1... (LBA: 0 - 62255) -> Track 01 (Mode 1, LBA: 0 - 62254) -> LeadOut (LBA: 62255) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 62255, LRA: 0) Link to comment Share on other sites More sharing options...
Cynthia Posted November 30, 2008 Share Posted November 30, 2008 You tried to read it in one of the other two burners that you have installed in your computer? Link to comment Share on other sites More sharing options...
MJames Posted November 30, 2008 Author Share Posted November 30, 2008 No I will try that now, I have it in the dvd player and a blank cd-r in the other burner. One burner does not work. I use a external burner instead of the one in the computer. thanks Michelle Link to comment Share on other sites More sharing options...
MJames Posted November 30, 2008 Author Share Posted November 30, 2008 Thank you Cynthia it works when I use the burner I really appreciate you help thanks again Michelle Link to comment Share on other sites More sharing options...
Recommended Posts