burning to dl wont work I/O error

[wolfbaru]

Hey im having problems burning to a dl disk. its not a verbatim its a memorex but i have used the same disks to burn before and never had a problem.

 

I 10:52:53 ImgBurn Version 2.4.2.0 started!

I 10:52:53 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 10:52:53 Total Physical Memory: 3,405,388 KB - Available: 2,280,656 KB

I 10:52:53 Initialising SPTI...

I 10:52:53 Searching for SCSI / ATAPI devices...

I 10:52:53 Found 1 DVD

[mmalves]

I 10:55:47 Destination Device: [4:0:0] HL-DT-ST DVDRAM GSA-H42N RL00 (E:) (SCSI)

There's firmware RL01 available at http://au.lgservice.com/ (Device Driver -> DVD-ROM(Writer) -> page 6). Remove any disc and close the tray before upgrading. Reboot after it has finished.

 

Also make sure you have the latest storage drivers available for your chipset/motherboard.

[volvofl10]

i think you have just been lucky so far that the memorex worked O.K till now. the firmware update "may" solve the problem for a while, but its only a matter of time before the actual discs fail you.

 

have a look HERE at these independant reviews. Your's is the first memorex in the list with 16 comments

 

you should look at for the other side of the story http://forum.imgburn.com/index.php?showtopic=8000

[LIGHTNING UK!]

Have you recently updated your drivers or anything?

 

Windows is returning an error code so it's not even from the drive itself.

 

What controller is your drive attached to?

[wolfbaru]

Tried updating the drivers and bios and it worked! thank you so much, and yes i know that memorex isent great and i buy verbatim 90% of the time.

 

i also think you guys should know that imgburn rules and is some of the best freeware on the net so thank you lightning uk