tehfreeman Posted December 21, 2008 Share Posted December 21, 2008 I'm new here so thanks in advance for any replies. I'm basically using Imgburn to make images of DVD home videos so I can duplicate them. I'm using Taio Yuden media which was working great for 15 DVD's in a row. I was creating my images and then burning them to Taio Yuden discs for duplication. I managed to be successful burning one copy but then on the 2nd copy I began the downward spiral of 5 coasters in a row and they all have the exact same issue... And it goes like this: And error window pops up... --------------------------------------------- I/O Error! Device: [1:00:0] PHILIPS DVD+-RW SDVD8820 AD20 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 03 40 10 00 00 01 00 Interpretation: Read (10) - Sector 213008 Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 00 00 Interpretation: No Seek Complete --------------------------------------------- Then I check the log and I've got: I 22:55:11 ImgBurn Version 2.4.2.0 started! I 22:55:11 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 22:55:11 Total Physical Memory: 2,095,480 KB - Available: 1,452,332 KB I 22:55:11 Initialising SPTI... I 22:55:11 Searching for SCSI / ATAPI devices... I 22:55:22 Found 1 DVD Link to comment Share on other sites More sharing options...
tehfreeman Posted December 21, 2008 Author Share Posted December 21, 2008 The most I can find on forums etc is that my media doesn't like my burner (which according to many may not be a surprise for the burner I have)... The Philips seems to have its fair share (actually a lot) of critics and unhappy customers, but could it be something else considering it had 15-16 successful (in a row) burns prior to these coasters? Link to comment Share on other sites More sharing options...
mmalves Posted December 21, 2008 Share Posted December 21, 2008 I 22:55:31 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2x, 4x, 6x, 8x)I 22:55:32 Write Speed: MAX Try a lens cleaning disc on that drive. You might also want to try using the other available burning speeds. If that still doesn't work, try with DVD+R media (Verbatim and Taiyo Yuden are the best). I would go for a normal-size burner in an external enclosure, as that gives you much better quality burns Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 21, 2008 Share Posted December 21, 2008 Are they genuine TY's or something by the likes of datawrite / datasafe? (i.e. all the ones that didn't quite pass the TY quality tests or whatever!) Link to comment Share on other sites More sharing options...
tehfreeman Posted December 22, 2008 Author Share Posted December 22, 2008 Are they genuine TY's or something by the likes of datawrite / datasafe? (i.e. all the ones that didn't quite pass the TY quality tests or whatever!) To my knowledge all are genuine TY. The 6 coasters on my pc laptop left me a bit disturbed. I even encountered some read issues on my laptop as well with some older home dvds produced like a year ago (2) so I'm not sure but perhaps it is my read/write drive. In the meantime I switched over temporarily to my iMac and "simpyburn" to just create images and burn them and I have had 4 flawless images made and 4 burned within the last 18 hours so that is a good sign... Link to comment Share on other sites More sharing options...
Recommended Posts