Thumper Strauss Posted December 28, 2008 Posted December 28, 2008 I am using Staples DVD+R dics on my Pioneer 112D DVD+-RW burner. I am burning at 1x speed. I have been getting miscompare errors on verification. I didn't have these problems with Nero 6. Any suggestions? I 09:52:23 ImgBurn Version 2.4.2.0 started! I 09:52:23 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 09:52:23 Total Physical Memory: 2,096,236 KB - Available: 1,248,552 KB I 09:52:23 Initialising SPTI... I 09:52:23 Searching for SCSI / ATAPI devices... I 09:52:24 Found 1 DVD
mmalves Posted December 28, 2008 Posted December 28, 2008 That could be due to memory errors, so grab memtest86+ and leave it running for a few hours. I 10:17:34 Destination Device: [4:0:0] PIONEER DVD-RW DVR-112D 1.21 (E:) (SCSI)I 10:17:34 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 6x, 8x, 12x) There's firmware 1.28 available for your burner.
Cynthia Posted December 28, 2008 Posted December 28, 2008 I didn't have these problems with Nero 6. I think Nero only checks if the burned disc can be read, not comparing it byte for byte with the original source file(s) as ImgBurn does.
spinningwheel Posted December 30, 2008 Posted December 30, 2008 I 10:17:34 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 6x, 8x, 12x) It could also be this crappy media.
Recommended Posts