Janset Posted January 2, 2009 Posted January 2, 2009 Hi all. From time to time something goes wrong with a DVD burn, yet when I look at the )blank) DVD it appears that no action was taken upon same. In Imgburn, how do I go about testing the blank disc to check if it still O.K. or has it been rendered into a coaster? Regards
mmalves Posted January 2, 2009 Posted January 2, 2009 Please post a log from one of those failed burns (you can find the logs at Help menu -> ImgBurn Logs).
renshaw8 Posted January 2, 2009 Posted January 2, 2009 From my experience creating many coasters, put the suspect disk in the drive and with ImgBurn in the "build" mode select "device" and if the DVD is now a coaster the "status" will be INCOMPLETE instead of EMPTY
Janset Posted January 3, 2009 Author Posted January 3, 2009 From my experience creating many coasters, put the suspect disk in the drive and with ImgBurn in the "build" mode select "device" and if the DVD is now a coaster the "status" will be INCOMPLETE instead of EMPTY Thank guys. renshaw8, yours sounds the easiest. I will give that a try first. If I do not get any joy then will go the other path. Regards
Recommended Posts