Feyzir Posted January 11, 2009 Posted January 11, 2009 I am trying to burn the Windows 7 Beta to a DVD+R disc. I keep on getting Power Calibration Errors. I have tried three discs, all from the same store bought stack, all of which fail. Tried lowering the speed to 6x, but the same problem happens. I 16:05:28 Operation Started!I 16:05:28 Source File: C:\Users\Main\Downloads\7000.0.081212-1400_client_en-us_Ultimate-GB1CULFRE_EN_DVD.iso I 16:05:28 Source File Sectors: 1,278,708 (MODE1/2048) I 16:05:28 Source File Size: 2,618,793,984 bytes I 16:05:28 Source File Volume Identifier: GB1CULFRE_EN_DVD I 16:05:28 Source File Volume Set Identifier: f7a11400MS UDFBridge I 16:05:28 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM) I 16:05:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:05:28 Source File File System(s): ISO9660 (Bootable), UDF (1.02) I 16:05:28 Destination Device: [0:1:0] PBDS DVD+-RW DH-16W1S 2D15 (E:) (ATAPI) I 16:05:28 Destination Media Type: DVD+R (Disc ID: DAXON-AZ2-00) (Speeds: 6x, 8x) I 16:05:28 Destination Media Sectors: 2,295,104 I 16:05:28 Write Mode: DVD I 16:05:28 Write Type: DAO I 16:05:28 Write Speed: MAX I 16:05:29 DVD+R Reserve Track: No I 16:05:29 Link Size: Auto I 16:05:29 Test Mode: No I 16:05:29 OPC: No I 16:05:29 BURN-Proof: Enabled I 16:05:29 Filling Buffer... (40 MB) I 16:05:32 Writing LeadIn... W 16:06:32 Retrying (1 of 20)... W 16:07:30 Retry Failed - Reason: Power Calibration Area Error W 16:07:30 Retrying (2 of 20)... W 16:08:30 Retry Failed - Reason: Power Calibration Area Error W 16:08:31 Retrying (3 of 20)... W 16:09:32 Retry Failed - Reason: Power Calibration Area Error W 16:09:32 Retrying (4 of 20)... W 16:10:29 Retry Failed - Reason: Power Calibration Area Error W 16:10:29 Retrying (5 of 20)... W 16:11:30 Retry Failed - Reason: Power Calibration Area Error W 16:11:30 Retrying (6 of 20)... I 16:11:42 Abort Request Acknowledged W 16:12:31 Retry Failed - Reason: Power Calibration Area Error E 16:12:31 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 16:12:31 Synchronising Cache... W 16:12:38 User opted to skip the 'Close Track/Session/Disc' functions. E 16:12:38 Failed to Write Image! E 16:12:38 Operation Aborted! - Duration: 00:07:09 I 16:12:38 Average Write Rate: N/A - Maximum Write Rate: N/A
Feyzir Posted January 11, 2009 Author Posted January 11, 2009 Tried again, letting it retry the whole 20 times: No change. I 17:13:14 ImgBurn Version 2.4.2.0 started!I 17:13:14 Microsoft Windows Vista Home Basic Edition (6.0, Build 6001 : Service Pack 1) I 17:13:14 Total Physical Memory: 2,094,544 KB - Available: 1,499,792 KB I 17:13:14 Initialising SPTI... I 17:13:14 Searching for SCSI / ATAPI devices... I 17:13:14 Found 1 DVD
blutach Posted January 11, 2009 Posted January 11, 2009 Get better media - Verbatim or Taiyo Yuden are the only ones we recommend. Look for a firmware update from Philips. Regards
Feyzir Posted January 14, 2009 Author Posted January 14, 2009 It seems like the drive went bad. It came with my Dell Inspiron 530, and when I replaced the drive with a new Asus one, it burned fine. Just to say what my results were.
spinningwheel Posted January 15, 2009 Posted January 15, 2009 Thanks for getting back to us and letting us know what the problem/outcome was.
Recommended Posts