shyam2pac Posted January 15, 2009 Share Posted January 15, 2009 (edited) IMgburn team pls help me - I have now wasted more than 5 dvd's dual layer Here are my logs, i never use to have this problem. Now i have and need to fix this. please help after writing 50% starting to write Layer 1 this error pop's up My Burn Logs I 13:43:17 ImgBurn Version 2.4.2.0 started!I 13:43:17 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 1) I 13:43:17 Total Physical Memory: 8,317,060 KB - Available: 7,430,600 KB I 13:43:17 Initialising SPTI... I 13:43:17 Searching for SCSI / ATAPI devices... I 13:43:26 Found 1 CD-RW and 1 DVD error.bmp error2.bmp error.bmp Edited January 15, 2009 by shyam2pac Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 15, 2009 Share Posted January 15, 2009 Update your firmware, 1.0f is out now. Link to comment Share on other sites More sharing options...
spinningwheel Posted January 15, 2009 Share Posted January 15, 2009 I 13:49:37 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 2.4x) In addition to what the Boss said, get some decent discs. We only recommend Verbatim DataLifePlus made in Singapore for DL writing or Taiyo Yuden and Verbatim (Singapore) for single layer writes. Link to comment Share on other sites More sharing options...
shyam2pac Posted January 15, 2009 Author Share Posted January 15, 2009 Update your firmware, 1.0f is out now. THANK YOU! i have updated the firmware. and was able to write my first disk. Also i use Melody brand - DL disk for writing. Thanks for prompt response.. Link to comment Share on other sites More sharing options...
shyam2pac Posted January 15, 2009 Author Share Posted January 15, 2009 Update your firmware, 1.0f is out now. THANK YOU! i have updated the firmware. and was able to write my first disk. Also i use Melody brand - DL disk for writing. Thanks for prompt response.. PROBLEM - After successful Completion of writing to DISK. My player is not playing the written disk. - My player just ejects the DVD out Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 15, 2009 Share Posted January 15, 2009 Did you burn and verify? Please post a log once you've done that. Link to comment Share on other sites More sharing options...
shyam2pac Posted January 15, 2009 Author Share Posted January 15, 2009 (edited) Did you burn and verify? Please post a log once you've done that. No i have not done verify is it a must ? I just realized that when i was troubleshooting it before i had left it unchecked... soo that is why my player ejecting the dvd out ? not sure. please advise Edited January 15, 2009 by shyam2pac Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 15, 2009 Share Posted January 15, 2009 It is if you're having problems! Link to comment Share on other sites More sharing options...
shyam2pac Posted January 15, 2009 Author Share Posted January 15, 2009 It is if you're having problems! Ok, am burning another movie - it will be done in 30min ... this time its verify checked. will keep u posted .. thank you for the prompt reply.... Link to comment Share on other sites More sharing options...
shyam2pac Posted January 15, 2009 Author Share Posted January 15, 2009 It is if you're having problems! Ok, am burning another movie - it will be done in 30min ... this time its verify checked. will keep u posted .. thank you for the prompt reply.... BAD NEWS i Lost one more disk here is the log I 04:40:37 ImgBurn Version 2.4.2.0 started!I 04:40:37 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 1) I 04:40:37 Total Physical Memory: 8,317,060 KB - Available: 7,362,268 KB I 04:40:37 Initialising SPTI... I 04:40:37 Searching for SCSI / ATAPI devices... I 04:40:37 Found 1 CD-RW and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted January 16, 2009 Share Posted January 16, 2009 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
juggy Posted January 18, 2009 Share Posted January 18, 2009 http://forum.imgburn.com/index.php?showtopic=8000 Hi i just got a new pioneer dvr-116d - i updated to 1.09 and am having issues with the verbatim dl at 2.4 x any ideas - is there a newer firmware? what do you figure the issue is?? here is imgburn log burning at 2.4x verbatim are rated to 8x but are the 2.4x discs (mkm-001-000) >>> I 15:20:27 ImgBurn Version 2.4.2.0 started! I 15:20:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 15:20:27 Total Physical Memory: 1,048,096 KB - Available: 589,512 KB I 15:20:41 Initialising SPTI... I 15:20:41 Searching for SCSI / ATAPI devices... I 15:20:42 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 18, 2009 Share Posted January 18, 2009 Make your own thread juggy. Link to comment Share on other sites More sharing options...
Recommended Posts