ronjigga22 Posted January 17, 2009 Posted January 17, 2009 I am trying to back up a game of my mine, Far Cry 2, with ImgBurn and this is the error I am getting; I 13:17:11 Operation Started! I 13:17:11 Source File: C:\Users\Family\Desktop\Downloads\Far Cry 2.iso I 13:17:11 Source File Sectors: 2,724 (MODE1/2048) I 13:17:11 Source File Size: 5,578,752 bytes I 13:17:11 Source File Volume Identifier: XGD2DVD_NTSC I 13:17:11 Source File Volume Set Identifier: 34672923 I 13:17:11 Source File Implementation Identifier: Sonic Scenarist 3.1 I 13:17:11 Source File File System(s): ISO9660, UDF (1.02) I 13:17:11 Destination Device: [0:1:0] Optiarc DVD RW AD-7560S S801 (E:) (ATAPI) I 13:17:11 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 13:17:11 Destination Media Sectors: 4,173,824 I 13:17:11 Write Mode: DVD I 13:17:11 Write Type: DAO I 13:17:11 Write Speed: 2.4x I 13:17:11 Link Size: Auto I 13:17:11 Test Mode: No I 13:17:11 OPC: No I 13:17:11 BURN-Proof: Enabled I 13:17:13 Book Type Setting: N/A E 13:17:40 User specified layer break position is such that L0 < L1. E 13:17:40 Image Size: 2,724 E 13:17:40 User Specified L0 Sectors: 1,913,760 E 13:17:40 Calculated L1 Sectors: 4,293,056,260 E 13:17:40 Operation Failed! - Duration: 00:00:29 I 13:17:40 Average Write Rate: N/A - Maximum Write Rate: N/A I 13:18:08 Operation Started! I 13:18:08 Source File: C:\Users\Family\Desktop\Downloads\FarCry 2.dvd I 13:18:08 Source File Sectors: 2,724 (MODE1/2048) I 13:18:08 Source File Size: 5,578,752 bytes I 13:18:08 Source File Volume Identifier: XGD2DVD_NTSC I 13:18:08 Source File Volume Set Identifier: 34672923 I 13:18:08 Source File Implementation Identifier: Sonic Scenarist 3.1 I 13:18:08 Source File File System(s): ISO9660, UDF (1.02) I 13:18:08 Destination Device: [0:1:0] Optiarc DVD RW AD-7560S S801 (E:) (ATAPI) I 13:18:08 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 13:18:08 Destination Media Sectors: 4,173,824 I 13:18:08 Write Mode: DVD I 13:18:08 Write Type: DAO I 13:18:08 Write Speed: 2.4x I 13:18:08 Link Size: Auto I 13:18:08 Test Mode: No I 13:18:08 OPC: No I 13:18:08 BURN-Proof: Enabled I 13:18:10 Book Type Setting: N/A E 13:18:35 User specified layer break position is such that L0 < L1. E 13:18:35 Image Size: 2,724 E 13:18:35 User Specified L0 Sectors: 1,913,760 E 13:18:35 Calculated L1 Sectors: 4,293,056,260 E 13:18:35 Operation Failed! - Duration: 00:00:27 I 13:18:35 Average Write Rate: N/A - Maximum Write Rate: N/A Please help
Cynthia Posted January 17, 2009 Posted January 17, 2009 Hi and welcome to the forum, ronjigga22! I 13:18:08 Source File Sectors: 2,724 (MODE1/2048) Your images size is very small and the padding makes it be to big even for a DL disc. E 13:17:40 User specified layer break position is such that L0 < L1.E 13:17:40 Image Size: 2,724 E 13:17:40 User Specified L0 Sectors: 1,913,760 E 13:17:40 Calculated L1 Sectors: 4,293,056,260 I 13:17:11 Destination Media Sectors: 4,173,824 So I can't understand why you want to spend a DL disc on such a small file, when you could burn it to a regular DVD?
LIGHTNING UK! Posted January 17, 2009 Posted January 17, 2009 ImgBurn cannot be used to read your xbox originals, they're protected against casual copying.
ronjigga22 Posted January 20, 2009 Author Posted January 20, 2009 ImgBurn cannot be used to read your xbox originals, they're protected against casual copying. Yeah I figured that out. I did download the game and still got an error burning. I did not copy the error message but it seemed to burn just fine but when it came time to verify there were errors and then I put it in my 360 and it said "wrong region." Do I need to use an external drive to burn? I would like to just use my laptop dvd burner. I want to make sure I got everything needed because those damn dvd dl are expensive. Any help is appreciated. Thanks
LIGHTNING UK! Posted January 20, 2009 Posted January 20, 2009 If you have a problem with the burning stage, post a log so we can see exactly what happened.
ronjigga22 Posted January 24, 2009 Author Posted January 24, 2009 If you have a problem with the burning stage, post a log so we can see exactly what happened. I 09:51:03 ImgBurn Version 2.4.2.0 started! I 09:51:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 09:51:03 Total Physical Memory: 2,553,776 KB - Available: 1,478,624 KB I 09:51:03 Initialising SPTI... I 09:51:03 Searching for SCSI / ATAPI devices... I 09:51:03 Found 1 DVD
LIGHTNING UK! Posted January 24, 2009 Posted January 24, 2009 That's not you burning though, that's you trying to verify something. It would be better if we could see you trying to burn and verify something in a single session. The log shows your drive can't read the disc. Either the disc is faulty or your writer just produced a really bad burn. What make is your computer? Have you checked with whoever made it to see if there are any firmware updates for the drive?
ronjigga22 Posted January 24, 2009 Author Posted January 24, 2009 That's not you burning though, that's you trying to verify something. It would be better if we could see you trying to burn and verify something in a single session. The log shows your drive can't read the disc. Either the disc is faulty or your writer just produced a really bad burn. What make is your computer? Have you checked with whoever made it to see if there are any firmware updates for the drive? I have Lenovo Ideapad y530. I am using verbatim dl. I did check my driver and it is up to date. I did a scan.
LIGHTNING UK! Posted January 24, 2009 Posted January 24, 2009 Where do the verbatims say they're made? IF they're made in Singapore and your drive won't even produce a readable burn on those then you should try using a cleaning disc before asking for a new drive (or buying an external one yourself)
ronjigga22 Posted January 24, 2009 Author Posted January 24, 2009 Where do the verbatims say they're made? IF they're made in Singapore and your drive won't even produce a readable burn on those then you should try using a cleaning disc before asking for a new drive (or buying an external one yourself) Ok I got it to work but it will not work in my xbox 360 it says incorrect region code. I just had my 360 modded and it is playing other burned 360 games. I have prince of persia and fallout 3. I just burned mirror's edge. Some help? Not sure if this is the forum for this question but any help would be appreciated. thanks
ronjigga22 Posted January 24, 2009 Author Posted January 24, 2009 It's not, no. That's fine thanks, anyway.
ronjigga22 Posted January 30, 2009 Author Posted January 30, 2009 Here is the error. Help please? I 18:22:11 ImgBurn Version 2.4.2.0 started! I 18:22:11 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 18:22:11 Total Physical Memory: 2,553,776 KB - Available: 1,761,628 KB I 18:22:11 Initialising SPTI... I 18:22:11 Searching for SCSI / ATAPI devices... I 18:22:11 Found 1 DVD
LIGHTNING UK! Posted January 30, 2009 Posted January 30, 2009 Your drive can't read back what it just wrote. Bad disc? Bad quality burn from your drive? Try cleaning the lense with a cleaning disc.
ronjigga22 Posted January 30, 2009 Author Posted January 30, 2009 Your drive can't read back what it just wrote. Bad disc? Bad quality burn from your drive? Try cleaning the lense with a cleaning disc. Funny thing is the game worked. Do I have to verify that the disc is good? I think I waited too long after burning to verify. After burning my disc ejects and then I am supposed to put it back in to verify but this time I waited awhile.
blutach Posted January 31, 2009 Posted January 31, 2009 Your drive can't read back what it just wrote. Bad disc? Bad quality burn from your drive? Try cleaning the lense with a cleaning disc. Funny thing is the game worked. Do I have to verify that the disc is good? I think I waited too long after burning to verify. After burning my disc ejects and then I am supposed to put it back in to verify but this time I waited awhile. Verifying is ALWAYS a good idea. Just tick the verify box and ImgBurn will open and close the drive after the burn and begin the verification. And you might think the game works, but when it tries to read those bad sectors, I suspect that it won't. I 19:05:06 Cycling Tray before Verify...W 19:10:54 Waiting for device to become ready... I 19:11:11 Device Ready! Your drive took forever to initialise itself for the read after writing. Regards
Recommended Posts