HL-DT-ST DVDRAM GSA-T20N WR02

[vizouk]

I'm using verbatim dvd+r DL it used to work like a charm in my drive but now it doesn't, i tried burn 3times with Clonecd at 4 and the others times at 2.4x and it failled.

one time at 15% other 13% and other in the begin

Well after i said myselft everyone say use imgburn so lets try it.

 

I tried first time and what failled too :s

 

here the logs , i restarted my system between the 2 and let it rest a little bit

 

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; quarta-feira, 21 Janeiro 2009, 09:00:25

; \\****************************************//

;

;

I 08:44:43 ImgBurn Version 2.4.2.0 started!

I 08:44:43 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 08:44:43 Total Physical Memory: 3.144.172 KB - Available: 1.997.680 KB

I 08:44:43 Initialising SPTI...

I 08:44:43 Searching for SCSI / ATAPI devices...

I 08:44:43 Found 1 DVD-ROM and 1 DVD

Edited January 21, 2009 by vizouk

[vizouk]

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; quarta-feira, 21 Janeiro 2009, 10:32:18

; \\****************************************//

;

;

I 10:20:28 ImgBurn Version 2.4.2.0 started!

I 10:20:28 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 10:20:28 Total Physical Memory: 3.144.172 KB - Available: 1.968.208 KB

I 10:20:28 Initialising SPTI...

I 10:20:28 Searching for SCSI / ATAPI devices...

I 10:20:28 Found 1 DVD-ROM and 1 DVD

[LIGHTNING UK!]

It could be.

 

Try at 4x and 6x speeds.

 

Then try with 2.4x verbatims - the ones that use the MKM-001-00 dye instead of MKM-003-00 (8x) dye.

 

If none of that works, try the drive in another PC before sending it off for repair or whatever.

[vizouk]

It could be.

 

Try at 4x and 6x speeds.

 

Then try with 2.4x verbatims - the ones that use the MKM-001-00 dye instead of MKM-003-00 (8x) dye.

 

If none of that works, try the drive in another PC before sending it off for repair or whatever.

Tanks for help, at 4x its the same thing and my burner don't le me burn at 6x =/

 

Now i tried using a memorex disk (ritek) dvd-r dl , and the burn failled too, no suprise here but the disk near the zone where it stopped got scratchs (i believe its the right word, my english suck sorry) i see thousands small scratchs that assemble a circular scratch with 1.5cm. I can take a photo if necessary.

 

Verbatim disks that failled didn't get that scratchs only this memorex.

 

Can it be some dust on the drive? Its a laptop drive so i can only send all laptop to warranty.

 

regards

[LIGHTNING UK!]

According to your log, the drive does in fact support burning MKM-003-00 at 6x.

 

I 10:20:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)

 

If it's scratching discs then something doesn't sound right. You should contact whoever makes the laptop and see what they say.

[vizouk]

I will contact them to replace the drive (its under warranty) asap , atm isn't possible as i need laptop to university.

 

I cleaned the len, after remove Clonecd driver and set speed to 6x, it was 2.4-4x during begin and end.

And it worked i'm happy after 9dvd's DL (8verbatim) i got one working lol. I will probably buy one drive to my desktop.

 

 

Here the print of ibg, i don't know how analyze this xD