RMRAM2PM Posted January 29, 2009 Posted January 29, 2009 Hellow everyone, I'm new here. Had some trouble, so here goes... MY Log: (WITH A YELLOW WARNING) Failed to Read Sector 1456832 - Reason: Unconvered Read Error Sector 1456832 maps to File:\VIDEO_TS\VTS_01_3.VOB Failed to Read Sector 1456944 - Reason: Unconvered Read Error Sector 1456944 maps to File:\VIDEO_TS\VTS_01_3.VOB (WITH AN RED X) Failed to Read Sector 1456945 - Reason: Unconvered Read Error Sector 1456945 maps to File:\VIDEO_TS\VTS_01_3.VOB Failed to Verify Sectors! Thought I followed everything correctly, execpt adjusted the burn speed to 2x.... Never used this porgram before. Does anyone know what may have happened? Image Buffer met 100%, but the top bar stopped at 70% with an I/O Error pop asking to Continue, Try Again, or Cancel. I tried a few times to continue, but the message kept popping up. The actual dvd looks full-written.... Any help would be appreciated. I'm trying to Write an .ISO image file for playback on my home TV DVD player. Thank you much!
mmalves Posted January 29, 2009 Posted January 29, 2009 Please post the log from that burn (you can find it at Help menu -> ImgBurn Logs).
RMRAM2PM Posted January 29, 2009 Author Posted January 29, 2009 Please post the log from that burn (you can find it at Help menu -> ImgBurn Logs). Uploaded the Notepad ImgBurn Log... Here it is as well.... Doesn't seem like it says much.... I 21:18:59 ImgBurn Version 2.4.2.0 started! I 21:18:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3, v.5657) I 21:18:59 Total Physical Memory: 1,047,556 KB - Available: 615,864 KB I 21:18:59 Initialising SPTI... I 21:18:59 Searching for SCSI / ATAPI devices... I 21:18:59 Found 1 CD-RW, 1 DVD-ROM and 1 DVD ImgBurn.log
Cynthia Posted January 29, 2009 Posted January 29, 2009 Hi and welcome to the forum, RMRAM2PM! I 21:30:00 Destination Media Type: DVD-R (Disc ID: RITEKG03) (Speeds: 2x) Your firmware (the program that instructs how the writer should write the various media codes (Disc ID)) only supports 2x speed. I think that they are rated for a higher speed if you look at the box hey came in. So I get the feeling that the brand of media you are using is not supported in that firmware, instead it uses a very generic write approach and that seems not to work very good. I also looked for an updated version of the firmware, but I couldn't find any. I would suggest you try with another brand of media. Verbatims generally works best. Ritek is neither one of the brands with highest quality scores.
Recommended Posts