Sydman Posted February 4, 2009 Posted February 4, 2009 Did some searching and didn't see any other topics on this one so I figured I would give it a shot. I am running Ceedo on a 32gb Patriot Xporter Xt flash drive, and installed imgburn on it today. Loads up fine and all but only problem is it won't see the cdrom on the host computer. Was not sure if anyone else had messed with it before and found a fix for it. Any advice would be welcomed.
LIGHTNING UK! Posted February 5, 2009 Posted February 5, 2009 What does it say in the log window? copy + paste everything. Maybe the drive on the host computer isn't a burner?
Sydman Posted February 5, 2009 Author Posted February 5, 2009 I 15:00:04 ImgBurn Version 2.4.2.0 started! I 15:00:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:00:04 Total Physical Memory: 522,228 KB - Available: 117,220 KB W 15:00:04 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 15:00:04 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 15:00:04 Initialising SPTI... I 15:00:04 Searching for SCSI / ATAPI devices... E 15:00:04 Failed to check for ImgBurn update! E 15:00:07 CreateFile Failed! - Device: '\\.\CdRom0' (D:) E 15:00:07 Reason: Access is denied. W 15:00:07 Errors were encountered when trying to access a drive. W 15:00:07 This drive will not be visible in the program. E 15:00:07 You need Administrative privileges to use SPTI. W 15:00:07 No devices detected! Think I answered my own question by looking at the log. Says I don't have the rights. But should be an admin. Will have to double check that. Thank you though.
Recommended Posts