Getting write error!

[mayhem1279]

Hi, I'm a noob to imgburn and need help with burning. I don't know what all the abreviations mean and would appreciate it if someone can tell me if I'm doing something wrong. Everytime I'm burning a disc, it stops at 35%! I've been reading ppl say to use Verbatim. Or maybe it's their drive. So here's the log. Hopefully someone can give me an answer! Ty for your time!

 

 

I 23:59:35 ImgBurn Version 2.4.2.0 started!

I 23:59:35 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 23:59:35 Total Physical Memory: 513,808 KB - Available: 217,460 KB

W 23:59:35 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 23:59:35 Initialising SPTI...

I 23:59:35 Searching for SCSI / ATAPI devices...

I 23:59:35 Found 1 DVD-ROM and 1 DVD

[mmalves]

I 00:00:17 Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.01 (E:) (ATA)

I 00:00:17 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

There's firmware 1.04 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished.

 

If it doesn't help with your problem please read this thread: http://forum.imgburn.com/index.php?showtopic=8000

[mayhem1279]

I 00:00:17 Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.01 (E:) (ATA)

I 00:00:17 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

There's firmware 1.04 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished.

 

If it doesn't help with your problem please read this thread: http://forum.imgburn.com/index.php?showtopic=8000

 

 

 

Thanx for the response! Hopefully that will solve it.