chadburrows Posted February 7, 2009 Share Posted February 7, 2009 Hi, I am trying to burn a Verbatim 2.4x DVD+R DL disk and I am getting the following error in a pop up message on the screen: I/O Error! Device: [2:0:0] PIONEER DVD-RW DVR-216 1.03 (E:) (SCSI) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 17 F1 80 00 00 20 00 Interpretation: Write (10) - Sectors: 1569152 - 1569183 Sense Area: 71 00 03 00 17 4B A0 0E 00 00 00 00 0C 00 00 00 00 00 7A B1 00 00 00 00 Interpretation: Write Error The following is the info from ImgBurn: I 10:12:55 ImgBurn Version 2.4.2.0 started! I 10:12:55 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 10:12:55 Total Physical Memory: 1,572,332 KB - Available: 953,440 KB I 10:12:55 Initialising SPTI... I 10:12:55 Searching for SCSI / ATAPI devices... I 10:12:55 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted February 7, 2009 Share Posted February 7, 2009 I 10:18:29 Destination Device: [2:0:0] PIONEER DVD-RW DVR-216 1.03 (E:) (SCSI)I 10:18:29 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 10:18:29 Write Speed: 2.4x There's firmware 1.09 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished. If that doesn't work, try burning at 4x and the other available speeds, as slowest doesn't always mean better Link to comment Share on other sites More sharing options...
Recommended Posts