burn stopping @ 96-98%

[coronaextra]

I am not getting any errors that i know of and i have tryed burning at a slower speed and it is still just stopping at 98% most of the time, i have used img burn to burn hundreads of dvds and this problem just started a week ago so i thought i would upgrade to the new version and the problem still occurs, like 1 in 3 dvd's will actually finish.

 

Anyone that can help it would be greatly appreciated

I have posted a copy of the log i hope it tells you something

 

 

I 22:32:04 ImgBurn Version 2.4.2.0 started!

I 22:32:04 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 22:32:04 Total Physical Memory: 522,032 KB - Available: 173,612 KB

I 22:32:04 Initialising SPTI...

I 22:32:04 Searching for SCSI / ATAPI devices...

I 22:32:04 Found 1 DVD

[mmalves]

I 22:32:21 Destination Device: [0:1:0] PIONEER DVD-RW DVR-110D 1.11 (D:) (ATA)

I 22:32:21 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 22:32:21 Write Speed: MAX

There's firmware 1.41 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished. Also try burning at 8x or 12x for a better chance of success with that crappy media.

[coronaextra]

Thanks alot for the fast reply i will try both, the only thing is, why would this start now after years of using the same burner and same program would this start happening now i have always burnt at max and never encountered this problem

[spinningwheel]

i hope it tells you something

 

Yes it does...In addition to what mmalves wrote:

 

I 22:32:21 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x)

 

 

Your media choice is crap, that you were able to get as many burns as you did was surprising to read.

 

 

We only recommend Taiyo Yuden and Verbatikm ( Made in Singapore ) for any DVD burning job here for a reason.