Biru Posted February 17, 2009 Share Posted February 17, 2009 I'm getting crazy. Until a month ago, I've burned DL without problems. see the log: I 11:28:51 Operation Started! I 11:28:51 Source File: *******************.iso I 11:28:51 Source File Sectors: 3.617.237 (MODE1/2048) I 11:28:51 Source File Size: 7.408.101.376 bytes I 11:28:51 Source File Volume Identifier: ***** I 11:28:51 Source File Volume Set Identifier: 45BE0E2F I 11:28:51 Source File Application Identifier: ELBY CLONEDVD I 11:28:51 Source File Implementation Identifier: ELABORATE BYTES I 11:28:51 Source File File System(s): ISO9660; UDF (1.02) I 11:28:51 Destination Device: [0:0:0] _NEC DVD_RW ND-3500AG 2.16 (H:) (ATA) I 11:28:51 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x) I 11:28:51 Destination Media Sectors: 4.173.824 I 11:28:51 Write Mode: DVD I 11:28:51 Write Type: DAO I 11:28:51 Write Speed: 3x I 11:28:51 Link Size: Auto I 11:28:51 Test Mode: No I 11:28:51 OPC: No I 11:28:51 BURN-Proof: Enabled I 11:28:51 Book Type Setting: DVD-ROM W 11:28:59 Optimal L1 Data Zone Start LBA: None Found! (VTS_04) I 11:28:59 Optimal L0 Data Zone Capacity: 1.809.472 I 11:28:59 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 11:29:40 Filling Buffer... (40 MB) I 11:29:42 Writing LeadIn... I 11:29:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 3617236) I 11:29:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3617236) I 11:29:44 Writing Layer 0... (LBA: 0 - 1809471) I 11:47:43 Writing Layer 1... (LBA: 1809472 - 3617236) I 12:05:43 Synchronising Cache... I 12:05:45 Closing Track... I 12:06:16 Finalising Disc... I 12:07:08 Exporting Graph Data... I 12:07:08 Graph Data File: C:\Documents and Settings\Utente\Dati applicazioni\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-3500AG_2.16_MERCOLED Link to comment Share on other sites More sharing options...
Biru Posted February 17, 2009 Author Share Posted February 17, 2009 I've solved my problem!!!!!!!!!!!! I've made a last attempt, changing the media and using an older one, from Verbatim MKM-003-00 to Verbatim MKM-001-00. And it worksssssssssss Now I've to find some old media........... Biru Link to comment Share on other sites More sharing options...
mmalves Posted February 17, 2009 Share Posted February 17, 2009 I 11:28:51 Destination Device: [0:0:0] _NEC DVD_RW ND-3500AG 2.16 (H:) (ATA) There's newer firmware 2.1B available for your burner (maybe it has better support for MKM-003-00 media). Remove any disc and close the tray before flashing. Reboot after it has finished. Link to comment Share on other sites More sharing options...
Recommended Posts