frostylv13 Posted February 19, 2009 Posted February 19, 2009 Hi, I'm new to this site and IMgbrn But I have been having difficulties trying to back up copies of dvds. I did everything by the tutorial with DvdFAb, DVD Shrink and Imgbrn. However the disc will not play in my dvd player. It will play in my computer though. The disc read error is regarding to "playback" and not having it, or something like that.(Not at home to give you exact error code) Could you help me figure this out before I go bonkers?
spinningwheel Posted February 19, 2009 Posted February 19, 2009 Still stuck? Create a new thread and describe your issue in detail. It's much easier for us if you include a copy of the program's log in your post. Did you happen to see this at the very top of the page.....please post a log from the burn. spinner
frostylv13 Posted February 19, 2009 Author Posted February 19, 2009 Hi, I'm new to this site and IMgbrn But I have been having difficulties trying to back up copies of dvds. I did everything by the tutorial with DvdFAb, DVD Shrink and Imgbrn. However the disc will not play in my dvd player. It will play in my computer though. The disc read error is regarding to "playback" and not having it, or something like that.(Not at home to give you exact error code) Could you help me figure this out before I go bonkers? Sorry I did not see that and I wasn't home to get the log file. But if this correct this is the log file here. I 22:04:49 ImgBurn Version 2.4.2.0 started! I 22:04:49 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 22:04:49 Total Physical Memory: 522,224 KB - Available: 206,960 KB I 22:04:49 Initialising SPTI... I 22:04:49 Searching for SCSI / ATAPI devices... I 22:04:49 Found 1 DVD
spinningwheel Posted February 19, 2009 Posted February 19, 2009 I 22:07:58 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x) Have you tried the media we recommend all over this board? Semaphore Time Out: Read This.
frostylv13 Posted February 19, 2009 Author Posted February 19, 2009 If you are referring to "Verbatim and Taiyo Yuden blanks " Then no, because I haven't seen that media available in my area. And as for the part about the "Sempahore Timed out" I don't understand what it is that you want me to do with that? I clicked the link, and read but I don't know otherwise what to do?
mmalves Posted February 19, 2009 Posted February 19, 2009 I 22:07:58 Destination Device: [1:0:0] PHILIPS DVD+-RW DVD8701 5D24 (D:) (ATA) Is that burner on a Dell computer? If so, there's firmware DD26 available for it. Remove any disc and close the tray before updating. Reboot after it has finished. Also try burning at 8x or 12x instead of MAX.
Cynthia Posted February 19, 2009 Posted February 19, 2009 I 22:07:58 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x) I 22:07:58 Write Speed: MAX I 00:03:28 Average Write Rate: 2,582 KB/s (1.9x) - Maximum Write Rate: 2,939 KB/s (2.1x) Check if you have DMA enabled. The write rate is not looking ok. http://forum.imgburn.com/index.php?s=&...dpost&p=967
frostylv13 Posted February 19, 2009 Author Posted February 19, 2009 I 22:07:58 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x) I 22:07:58 Write Speed: MAX I 00:03:28 Average Write Rate: 2,582 KB/s (1.9x) - Maximum Write Rate: 2,939 KB/s (2.1x) Check if you have DMA enabled. The write rate is not looking ok. http://forum.imgburn.com/index.php?s=&...dpost&p=967 Thank you I will try both options, the driver and the device manager and see if they work. If not I'm sure I will let you know. ha ha
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 Okay so I wrote it to disc and all but the ImgBurn window is still up, and counting time and the log and program says it is finalising disc. It has been doing this for I'd say about a half hour. Is this normal? What do I do from here?
Cynthia Posted February 20, 2009 Posted February 20, 2009 Not normal. Try to close down ImgBurn. You installed the firmware and rebooted the computer?
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 Not normal. Try to close down ImgBurn. okay i went to close it down and discovered it was verfying sectors...is this normal? I do have the "verify" box check. It is 28% through that right now.
Cynthia Posted February 20, 2009 Posted February 20, 2009 Yes. That is normal. Let it continue. That way you know that the disc is ok. Can you post that log when it's done?
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 Yes. That is normal. Let it continue. That way you know that the disc is ok. Okay I got worried there for a moment that I didn't catch it in time and was afraid it was ruined. Ha. I also have the eject disc box checked, after it verfys the sectors, (should) it then eject the disc or is there more to it? (yeah I am so a newbie to this program)
Cynthia Posted February 20, 2009 Posted February 20, 2009 Yes. The tray will be ejected and then it's done.
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 Okay i pray that it works, this has been a stressful process.
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 Well the program said it completed successfully and such. But it still will not play in my dvd player.
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Thursday, 19 February 2009, 21:52:45 ; \\****************************************// ; ; I 19:07:30 ImgBurn Version 2.4.2.0 started! I 19:07:30 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 19:07:30 Total Physical Memory: 522,224 KB - Available: 18,952 KB I 19:07:30 Initialising SPTI... I 19:07:30 Searching for SCSI / ATAPI devices... I 19:07:30 Found 1 DVD
Cynthia Posted February 20, 2009 Posted February 20, 2009 I 21:08:27 Average Write Rate: 2,340 KB/s (1.7x) - Maximum Write Rate: 2,897 KB/s (2.1x) Something is still not right. Sure you did the DMA fix?
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 I 21:08:27 Average Write Rate: 2,340 KB/s (1.7x) - Maximum Write Rate: 2,897 KB/s (2.1x) Something is still not right. Sure you did the DMA fix? I couldn't find the DMA checkbox to check/uncheck whichever it was. And I did download the firmware and ran it, but nothing happened.
Cynthia Posted February 20, 2009 Posted February 20, 2009 I couldn't find the DMA checkbox to check/uncheck whichever it was. Here is a more detailed guide. http://www.cdrlabs.com/forums/how-enable-d...ures-t7625.html
frostylv13 Posted February 20, 2009 Author Posted February 20, 2009 I couldn't find the DMA checkbox to check/uncheck whichever it was. Here is a more detailed guide. http://www.cdrlabs.com/forums/how-enable-d...ures-t7625.html okay well i followed the instructions my transfer mode was already set to DMA if available but I tried clicking it again and pressing okay and going back to see if the the current transfer mode had changed from "POI" to either of the options listed in the tutorial and it did not change. It stayed "POI"
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now