bigmck Posted February 19, 2009 Share Posted February 19, 2009 I am getting closer to getting the DL DVD burned. When I get to the screen on Imgburn where I verify the label, I hit yes. It does not give me a chance to specify label breaks. A prompt comes up that says == Unable to find any cells that could be used for layer break. The layer break must be between sectors 1448626 and 2086912. Sector 1448626 falls between VTS_01 (Title) which starts at sector 341. Relative to the start of VTS_01 (Title) , the layer break must be between sectors 1448285 and 2086571. Relative sector 1448285 falls within PGC 1, Cell 1, which stats at relative sector 0. Relative to the start of Cell 1, try splitting between sectors 1448285 (2828.68 MB) and 2086571 (4075.33 MB) The screen that gives me the chance to divide the layers never came up. What did I do wrong? Thanks, Link to comment Share on other sites More sharing options...
mmalves Posted February 19, 2009 Share Posted February 19, 2009 Please read this guide: http://forum.imgburn.com/index.php?showtopic=6376 Link to comment Share on other sites More sharing options...
bigmck Posted February 20, 2009 Author Share Posted February 20, 2009 Please read this guide: http://forum.imgburn.com/index.php?showtopic=6376 I d/l VobBlanker and went to the link above. I did not get a good split the first time I did it. Before I ask any other questions, can I use the same file again that I split incorrectly to try a secont time to obtain a good split or did I need to extract the file from scratch again? Thanks, Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2009 Share Posted February 20, 2009 The playback should not be affected if you insert new splits (cells) in the old files. The only thing that will change is that you need to use the new information in the ImgBurn window that will tell you where to insert the split. Link to comment Share on other sites More sharing options...
Recommended Posts