davet Posted February 22, 2009 Share Posted February 22, 2009 (edited) A //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Sunday, 22 February 2009, 10:26:38 ; \\****************************************// ; ; I 10:03:34 ImgBurn Version 2.4.2.0 started! I 10:03:34 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 10:03:34 Total Physical Memory: 2,087,344 KB - Available: 1,684,668 KB I 10:03:34 Initialising SPTI... I 10:03:34 Searching for SCSI / ATAPI devices... I 10:03:34 Found 1 DVD Edited February 22, 2009 by davet Link to comment Share on other sites More sharing options...
Cynthia Posted February 22, 2009 Share Posted February 22, 2009 Hi and welcome to the forum, davet! Can you post the log from that burn? It's saved in this location Main Menu -> Help -> ImgBurn Logs The error is that your writer has problems to read the burned discs. The log might show the reason for that. Link to comment Share on other sites More sharing options...
davet Posted February 22, 2009 Author Share Posted February 22, 2009 Hi and welcome to the forum, davet! Can you post the log from that burn? It's saved in this location Main Menu -> Help -> ImgBurn Logs The error is that your writer has problems to read the burned discs. The log might show the reason for that. Link to comment Share on other sites More sharing options...
spinningwheel Posted February 22, 2009 Share Posted February 22, 2009 I 10:04:49 Destination Device: [0:1:0] PIONEER DVD-RW DVR-K14 1.14 (D:) (ATA) Your burner is quite aged as of now and many improvements have been initiated since it was built in 2005. I 10:04:49 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 1x, 2x, 4x, 6x, 8x) Your choice of media is purely crap. We recommend using Taiyo Yuden or Verbatim (Made in Singapore) to do the job correctly. Link to comment Share on other sites More sharing options...
Cynthia Posted February 22, 2009 Share Posted February 22, 2009 Try 4x as write speed. Can you see that burned disc in Windows Exporer? If the above doesn't help - go for post #5. (The Taiwanese Verbatims are also nice ones). Link to comment Share on other sites More sharing options...
Recommended Posts