alloutwillie Posted February 26, 2009 Posted February 26, 2009 Hey, my burner burns disks fine up to 100% and then when the disk is to be finalized it usually fails at about 77% of this last process. I use Memorex disks; but I have not had this problem ever before and I have burned about 15 memorex disks or so. At this point I have tried about 10 other memorex disks that have all failed, again due to the same problem of disk finalization. I woudl think that out of ten at least one should have worked. I have tried deleting imgburn and reinstalling it and all that jazz, but to no avail. The error code I recieved before was "session fixation error writing lead out" The last three times that I have tried to burn, my burner gets stuck at the syncronizing cache stage and I can hear my disk reader continually spinning. On a side note, I can burn normal music dicks fine without any problems. Here is the last log. I 00:23:34 ImgBurn Version 2.4.2.0 started! I 00:23:34 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6001 : Service Pack 1) I 00:23:34 Total Physical Memory: 6,281,484 KB - Available: 4,456,692 KB I 00:23:34 Initialising SPTI... I 00:23:34 Searching for SCSI / ATAPI devices... I 00:23:34 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted February 26, 2009 Posted February 26, 2009 If 6x and 8x don't work either, read this http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts